CONNOR-WINFIELD EML5434

THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
www.conwin.com
PRODUCT
D ATA
SHEET
CRYSTAL CONTROLLED OSCILLATORS
ABSOLUTE MAXIMUM RATINGS
PARAMETER
UNITS
(Vcc)
MINIMUM
NOMINAL
MAXIMUM
UNITS
-55
-
125
°C
-0.5
-
7.0
Vdc
OPERATING SPECIFICATIONS
PARAME TER
Center Frequency
Total Frequency Tolerance
Operating Temperature Range
NOTE
DESCRIPTION
TABLE 2.0
(Fo)
MINIMUM
19.44
-20
0
NOMINAL
-
MAXIMUM
167
20
70
UNITS
MHz
ppm
°C
Vdc
1
(Vcc)
3.135
3.3
3.465
Supply Current
(Icc)
-
-
60
mA
Jitter (BW=10Hz to 20MHz)
-
-
5
ps rms
Jitter (BW=12kHz to 20MHz)
-
-
1
ps rms
SSB Phase Noise at 10Hz offset
-
-60
-
dBc/Hz
SSB Phase Noise at 100Hz offset
-
-90
-
dBc/Hz
SSB Phase Noise at 1KHz offset
-
-100
-
dBc/Hz
SSB Phase Noise at 10KHz offset
-
-125
-
dBc/Hz
SSB Phase Noise at 10KHz offset
-
-135
-
dBc/Hz
MINIMUM
NOMINAL
MAXIMUM
UNITS
TABLE 3.0
NOTE
INPUT CHARACTERISTICS
PARAMETER
Enable Input Voltage (Low)
(Vil)
-
Vdc
2
(Vih)
2.275
-
1.68
Disable Input Voltage (High)
-
Vdc
2
(Voh)
(Vol)
MINIMUM
2.275
45
-
NOMINAL
50
-
MAXIMUM
50
1.68
55
1
UNITS
Ohms
Vdc
Vdc
%
nS
PECL OUTPUT CHARACTERISTICS
The Connor-Winfield EML5434
is a fixed frequency surface
mount Crystal Controlled
Oscillator (XO) designed for
applications requiring low jitter
and tight Frequency stability.
Operating at 3.3V supply
voltage, the EML5434 provides
LVPECL compatible outputs.
NOTE
Supply Voltage
PARAMETER
LOAD
Voltage
(High)
(Low)
Duty Cycle
Rise / Fall Time 20% to 80%
EML5434
TABLE 1.0
Storage Temperature
Supply Voltage
CW 0701
EML5434
155.52M
SURFACE MOUNT 3.3V PECL CLOCK
FEATURES
3.3V OPERATION
TABLE 4.0
PACKAGE CHARACTERISTICS
Package
NOTE
3
LVPECL DIFFERENTIAL OUTPUTS
LOW JITTER <1pS RMS
4
OVERALL FREQUENCY TOLERANCE:
±20ppm
INDUSTRIAL TEMPERATURE RANGE:
0 to 70°C
TABLE 5.0
Hermetically sealed, ceramic package with gold pl ated J leads.
ENABLE / DISABLE FUNCTION
Notes
1) Includes calibration, stability vs. tem perature, supply and load variations, shock, vibration and aging (10 years).
2) When oscillator is disabled the true out put is in a low state (Vol) and the complementary output is in the high st ate (VoH)
3) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent.
4) Duty Cycle measured at 1.977V
SURFACE MOUNT PACKAGE
TAPE AND REEL PACKAGING
ORDERING INFORMATION
EML5434
PECL
SERIES
- 155.52MHz
CENTER
FREQUENCY
Specifications subject to change without notice.
DATA SHEET #: Ec205
PAGE 1
OF
2
REV: 00
DATE:
5/4/04
aCopyright 2001 Connor-Winfield all rights reserved.
THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
www.conwin.com
PRODUCT
D ATA
SHEET
CW 0701
EML5434
155.52M
CRYSTAL CONTROLLED OSCILLATORS
E
D
1 2
E/D
N/C
Specifications subject to change without notice.
DATA SHEET #: Ec205
PAGE 2
OF
2
REV: 00
DATE:
5/4/04
aCopyright 2001 Connor-Winfield all rights reserved.