THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 581-5040. PHONE (630) 851-4722. www.conwin.com PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS ABSOLUTE MAXIMUM RATINGS PARAMETER TABLE 1.0 UNITS MINIMUM NOMINAL MAXIMUM UNITS -40 - 85 °C -0.5 - 7.0 Vdc MINIMUM NOMINAL MAXIMUM UNITS NOTE 16.384 -20 0 - MHz ppm °C 1 Vdc Storage Temperature Supply Voltage (Vcc) OPERATING SPECIFICATIONS NOTE TABLE 2.0 PARAMETER Center Frequency Total Frequency Tolerance Operating Temperature Range (Fo) - 200 20 70 Supply Voltage (Vcc) 3.135 3.3 3.465 Supply Current (Icc) - - 60 mA Jitter (BW=10Hz to 20MHz) - - 5 pS RMS Jitter (BW=12kHz to 20MHz) - - 1 pS RMS NOMINAL MAXIMUM - UNITS NOTE Vdc 2 1.68 Vdc 2 MAXIMUM 50 1.68 60 1 UNITS Ohms Vdc Vdc % nS INPUT CHARACTERISTICS TABLE 3.0 PARAMETER Disable Input Voltage (High) (Vih) MINIMUM 2.275 Enable Input Voltage (Low) (Vil) - - (Voh) (Vol) MINIMUM 2.275 40 - NOMINAL 50 - PECL OUTPUT CHARACTERISTICS CW 0701 FPLD54TB 155.52M SURFACE MOUNT 3.3V LVPECL CLOCK FPLD54TB DESCRIPTION The Connor-Winfield FPLD54TB is a fixed frequency, surface mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and a ±20ppm overall stability. Operating at 3.3V supply voltage, the FPLD54TB provides LVPECL Differential Outputs with Enable/Disable function. TABLE 4.0 PARAMETER LOAD Voltage (High) (Low) Duty Cycle Rise / Fall Time 20% to 80% NOTE 3 FEATURES 4 3.3V OPERATION LVPECL DIFFERENTIAL OUTPUTS PACKAGE CHARACTERISTICS Package PROCESS RECOMMENDATIONS Solder Reflow Wash TABLE 5.0 Non-hermetic package consisting of an FR4 subst rate with grounded metal cover. TABLE 6.0 The component solder used internal to this device has a m elting point of 221°C. The peak temperature inside the device should be less than or equal to 220°C for a maximum of 10 seconds Ultrasonic cleaning is not recommended. Notes 1) Includes initial tolerance, deviation over temperature, s upply and load variations, shock, vibration and 20 years aging. 2) When the oscillator is disabled, the t rue output is in a low state (Vol) and the complementary output is in the high stat e (VoH). 3) Output must be terminated into 50 ohms to V cc – 2V or Thevenin equivalent. 4) Duty Cycle measured at 1.977V DISABLE FUNCTION PAD 2 LOW JITTER <1pS RMS OVERALL FREQUENCY TOLERANCE ±20ppm SURFACE MOUNT PACKAGE TAPE AND REEL PACKAGING ORDERING INFORMATION FPLD54TB - 155.52MHz LVPECL CLOCK SERIES CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: Ec151 PAGE 1 OF 2 REV: 02 DATE: 8/26/02 aCopyright 2001 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 581-5040. PHONE (630) 851-4722. www.conwin.com PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS CW FPLD54TB 155.52M N/C ENABLE / DISABLE GROUND Q OUTPUT Q OUTPUT Vcc 80% 50% 20% N/C E/D Specifications subject to change without notice. DATA SHEET #: Ec151 PAGE 2 OF 2 REV: 02 DATE: 8/26/02 aCopyright 2001 Connor-Winfield all rights reserved.