THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS CW 0605 FPLD52TBXG 312.5M SURFACE MOUNT 3.3V LVPECL CLOCK ABSOLUTE MAXIMUM RATINGS PARAMETER TABLE 1.0 UNITS Storage Temperature Supply Voltage (Vcc) MINIMUM NOMINAL MAXIMUM UNITS -40 - 85 °C -0.5 - 7.0 Vdc MINIMUM NOMINAL MAXIMUM UNITS NOTE 200 -50 0 - 350 50 70 MHz ppm °C 1 Vdc OPERATING SPECIFICATIONS NOTE DESCRIPTION TABLE 2.0 PARAMETER Center Frequency Total Frequency Tolerance Operating Temperature Range (Fo) Supply Voltage (Vcc) 3.135 3.3 3.465 Supply Current (Icc) - - 80 mA Jitter (BW=10Hz to 20MHz) - - 8 pS RMS Jitter (BW=12kHz to 20MHz) - - 3 pS RMS NOMINAL MAXIMUM - UNITS NOTE Vdc 2 1.68 Vdc 2 MAXIMUM 50 1.68 55 1 UNITS Ohms Vdc Vdc % nS INPUT CHARACTERISTICS TABLE 3.0 PARAMETER Disable Input Voltage (High) (Vih) MINIMUM 2.275 Enable Input Voltage (Low) (Vil) - - (Voh) (Vol) MINIMUM 2.275 45 - NOMINAL 50 - PECL OUTPUT CHARACTERISTICS TABLE 4.0 PARAMETER LOAD Voltage (High) (Low) Duty Cycle Rise / Fall Time 20% to 80% PACKAGE CHARACTERISTICS Package FPLD52TBXG NOTE 3 The Connor-Winfield FPLD52TBXG is a fixed frequency, surface mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and a ±50ppm overall stability. Operating at 3.3V supply voltage, the FPLD52TBXG provides LVPECL Differential Outputs with Enable/Disable function. FEATURES 3.3V OPERATION LVPECL DIFFERENTIAL OUTPUTS 4 ENABLE / DISABLE FUNCTION PAD 2 OVERALL FREQUENCY TOLERANCE: ±50ppm TABLE 5.0 Non-hermetic package consisting of an FR4 subst rate with grounded metal cover. TEMPERATURE RANGE: 0 to70°C SURFACE MOUNT PACKAGE PROCESS RECOMMENDATIONS Solder Reflow Wash TABLE 6.0 The component solder used internal to this device has a m elting point of 221°C. The peak temperature inside the device should be less t han or equal to 220°C for a maximum of 10 seconds Ultrasonic cleaning is not recommended. TAPE AND REEL PACKAGING RoHS COMPLIANT / LEAD FREE ORDERING INFORMATION Notes 1) Includes initial tolerance, deviation over temperature, supply and load variations, shock, vibration and 20 years aging. 2) When the oscillator is disabled, the true output is in a low state (Vol) and the complementary output is in the high state (VoH). 3) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent. 4) Duty Cycle measured at 1.977V FPLD52TBXG - 312.5MHz LVPECL CLOCK SERIES CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: INT Ec225 PAGE 1 OF 2 REV: 00 DATE: 02/24/06 aCopyright 2001 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS Package Outline Suggested Pad Layout .140 MAX CW FPLD52TBXG 312.5M (3.56mm) Reflow Profile Pin Connections Pin 1 2 3 4 5 6 TABLE 7.0 Connection N/C Enable / Disable Ground Q Output Q Output Vcc Output Waveform Test Curcuit 80% 50% 20% N/C E/D Specifications subject to change without notice. DATA SHEET #: INT Ec225 PAGE 2 OF 2 REV: 00 DATE: 02/24/06 aCopyright 2001 Connor-Winfield all rights reserved.