THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS CW 0629 FPLD62T2G 100.0M 3.3V SURFACE MOUNT LVPECL CLOCK FPLD62T2G ABSOLUTE M AXIMUM RATING S PARAMETER TABLE 1.0 UNITS MINIMUM NOMINAL MAXIMUM UNITS -55 - 125 °C -0.5 - 7.0 Vdc MINIMUM NOMINAL MAXIMUM UNITS NOTE 16 -50 -40 - MHz ppm °C 1 - 250 50 85 Vdc Storage Temperature Supply Voltage (Vcc) OPERATING SPECIFIC ATIONS NOTE TABLE 2.0 PARAMETER Center Frequency Total Frequency Tolerance Operating Temperature Range (Fo) Supply Voltage (Vcc) 3.135 3.3 3.465 Supply Current (Icc) - - 60 mA Jitter (BW=10Hz to 20MHz) - - 5 pS RMS Jitter (BW=12kHz to 20MHz) - - 1 pS RMS Start Up Time - - 10 mS MINIMUM 2.275 45 - NOMINAL 50 - MAXIMUM 50 1.68 55 1 UNITS Ohms Vdc Vdc % nS LVPECL OUTPUT CHARACTERISTICS PARAMETER LOAD Voltage (High) (Low) Duty Cycle Rise / Fall Time 20% to 80% (Voh) (Vol) PACKAG E CHARACTERISTICS Package DESCRIPTION TABLE 3.0 NOTE 2 The Connor-Winfield FPLD62T2G is a fixed frequency, surface mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and a ±50ppm overall stability. Operating at 3.3V supply voltage, the FPLD62T2G provides LVPECL Differential Outputs. FEATURES 3.3V OPERATION LVPECL DIFFERENTIAL OUTPUTS 3 LOW JITTER <1pS RMS OVERALL FREQUENCY TOLERANCE: ±50ppm TABLE 4.0 Non-hermetic package consisting of an FR4 substrate with grounded metal cover. TEMPERATURE RANGE: -40 to 85°C SURFACE MOUNT PACKAGE PROCESS RECOMMENDATIONS TABLE 5.0 Soldering Process Wash See solder profile page 2. Ultrasonic cleaning is not recommended. TAPE AND REEL PACKAGING Notes 1) Includes initial tolerance, deviation over temperature, supply and load variations, shock, vibration and 20 years aging. 2) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent. 3) Duty Cycle measured at 1.977V RoHS COMPLIANT / LEAD FREE ORDERING INFORMATION FPLD62T2G - 100.0MHz LV PECL CLOCK SERIES CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: Ec240 PAGE 1 OF 2 REV: 00 DATE: 07/17/06 aCopyright 2001 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS Pin Connections FPLD62T2G 100.0M CW Package Layout 2 3 1 4 Q OUTPUT GROUND Q OUTPUT Vcc Dimensional Tolerance: ±.005” (.127mm) Suggested Pad Layout Output Waveform 80% 50% 20% Test Circuit Solder Profile Temperature 260°C 260°C 220°C 180°C 150°C 120°C 2 0 120 S Max. Time 10 S 60 S Max. 360 Sec. Max. Specifications subject to change without notice. DATA SHEET #: Ec240 PAGE 2 OF 2 REV: 00 DATE: 07/17/06 aCopyright 2001 Connor-Winfield all rights reserved.