THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS 5.0V 8 PIN DIP TRI-STATE CLOCK OSCILLATOR ABSOLUT E MAXIM UM RATIN GS PARAMETER Storage Temperature TABLE 1.0 UNITS MINIMUM -55 NOMINAL - MAXIMUM 125 UNITS °C Supply Voltage (Vcc) -0.5 Input Voltage (Vin) -0.5 - 7.0 Vdc - Vcc+0.5 Vdc CW 0633 H51RL 8M NOTE MODEL SPECIFICATIONS: MODEL H51RL H51RL H52RL H53RL TABLE 2.0 Frequency Range (Fo) Frequency Tolerance: 5 - 30 MHz -25 - 25 ppm 1 MODEL H52RL Frequency Range (Fo) Frequency Tolerance: 5 - 30 MHz -50 - 50 ppm 1 DESCRIPTION MODEL H53RL Frequency Range (Fo) Frequency Tolerance: 5 - 30 MHz -100 - 100 ppm MINIMUM -5 NOMINAL - MAXIMUM 70 UNITS °C OPERATING SPECIFICATION S 1 TABLE 3.0 PARAMETER Operating Temperature Range Supply Voltage (Vdd) 4.5 5.0 5.5 Vdc Supply Current (Icc) - 1.5 3.0 mA Supply Current (IST) - 6 15 uA Enable Voltage (High) (Vih) 70% Vdd - - Vdc Disable Voltage (Low) (Vil) - - 30% Vdd Vdc NOTE 2 INPUT CHARACTERISTICS TABLE 4.0 Enable Time - - 100 ns Disable Time - 3 10 ms HCMOS OUTPUT CHARACTERISTICS PARAMETER LOAD Voltage (High) (Low) NOMINAL - MAXIMUM 15 0.4 UNITS pF Vdc Vdc -3.2 45 50 3.2 55 mA mA % Rise / Fall Time 10% to 90% - 3 9 ns Start-Up Time - - 10 ms Jitter (BW=10Hz to 20MHz) - - 5 ps rms Jitter (BW=12kHz to 20MHz) - - 1 ps rms Current (High) (Low) Duty Cycle at 50% of Vcc (Ioh) (Ioh) FEATURES TABLE 5.0 MINIMUM 4.0 - (Voh) (Vol) 3 Description: Connor Winfield models H5xRL are 5.0V HCMOS, Surface Mount, Fixed Frequency Crystal Oscillator (XO) designed for use in all applications requiring precision clocks with low power consumption. PACKAG E CHARACTERISTICS NOTE 5 to 30 MHz 5.0V OPERATION LOW CURRENT CONSUMPTION TRI-STATE ENABLE/DISABLE OVERALL FREQUENCY TOLERANCE: H51RL ±25ppm H52RL ±50ppm H53RL ±100ppm TABLE 6.0 Package Hermetically sealed metal package Notes: 1) Inclusive of calibration @ 25 °C, frequency vs. temperature stability, suppl y voltage change, load change, shock and vibration, 10 years aging. 2) Standby current when oscillator is disabled. 3) Oscillator output is enabled with no connection on pin 1 TEMPERATURE RANGE: -5 to 70°C LOW JITTER: < 1ps Pin Connections Package Outline HERMETICALLY SEALED PACKAGE RoHS 5/6 COMPLIANT Pin 1 2 3 4 0.250 Max. (6.35mm) Connection Enable/Disable Ground Output Vcc ORDERING INFORMATION H51RL Enable / Disable Function (Pin 1) High or Open Low Output Enable Disable (High Impedance) CLOCK SERIES - 8 MHz CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: Hc209 PAGE 1 OF 1 REV: 00 DATE: 08/28/06 aCopyright 2001 Connor-Winfield all rights reserved.