THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. www.conwin.com PRODUCT D A TA SHEET CRYSTAL CONTROLLED OSCILLATORS 5.0V HCMOS/TTL COMPATIBLE14 PIN DIP CRYSTAL CLOCK OSCILLATOR CW 0107 HC61R8R 50.00M ABSOLUTE MAXIMUM RATINGS PARAMETER Storage Temperature Supply Voltage TABLE 1.0 UNITS MINIMUM -55 NOMINAL - MAXIMUM 125 UNITS °C (Vcc) -0.5 - 7.0 Vdc (Fo) 1.0 - 70 MHz -25 - 25 ppm NOTE MODEL SPECIFICATIONS: MODEL HC61R8R TABLE 2.0 Frequency Range Frequency Tolerance: OPERATING SPECIFICATIONS Operating Temperature Range Supply Voltage DESCRIPTION 1 The Connor-Winfield HC61R8R is a 5.0V HCMOS/TTL Compatible, Fixed Frequency Crystal Oscillator (XO) with Tri-state output. The HC61R8R is designed for use in all applications requiring a precision clock. TABLE 3.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS -40 - 85 °C (Vdd) 4.5 5.0 5.5 Vdc 1.0 to 24.999 MHz (Icc) - - 25 mA 25 to 49.999 MHz (Icc) - - 45 mA 50 to 70.000 MHz (Icc) - - 60 mA Enable Voltage (Vih) 2.2 - - Vdc Disable Voltage (Vil) - - 0.8 Vdc Enable Time - - 100 nS Disable Time - - 100 nS Supply Current HC61R8R NOTE INPUT CHARACTERISTICS TABLE 4.0 2 FEATURES HCMOS OUTPUT CHARACTERISTICS TABLE 5.0 PARAMETER LOAD Voltage (High) (Low) MINIMUM 4.5 - NOMINAL - MAXIMUM 50 0.5 UNITS pF Vdc Vdc -16 45 - 50 4 16 55 5 mA mA % nS Start-Up Time - 3 10 mS Jitter - - 5 pS RMS (Voh) (Vol) Current (High) (Low) Duty Cycle measured at 50% of Vcc Rise / Fall Time measured at 10% to 90% (Ioh) (Ioh) 1.0 to 70 MHz NOTE 3 5.0V OPERATION TRI-STATE ENABLE / DISABLE FUNCTION OVERALL FREQUENCY TOLERANCE OF ±25ppm TEMPERATURE RANGE -40 to 85°C HERMETICALLY SEALED PACKAGE PACKAGE CHARACTERISTICS TABLE 6.0 Package Hermetically sealed metal package Note: ORDERING INFORMATION 1) Inclusive of calibration @ 25°C, frequency vs. temperature stability, supply voltage change, load change, shock and vibration, 10 years aging. 2) Oscillator output is enabled with no connection on pin 1 3) Output drives 10 TTL loads. HC61R8R CLOCK SERIES - 50.00 MHz CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: INT Hc081 PAGE 1 OF 2 REV: 03 DATE: 3/8/02 a Copyright 2001 Connor-Winfield all rights reserved. PRODUCT D A TA SHEET CRYSTAL CONTROLLED OSCILLATORS .260 ENABLE/DISABLE 6.60 Dimensional Tolerance: ±.005 (.127mm) ±.02 (.508mm) 90% 50% 10% 5.0Vdc 50pF ENABLE/ DISABLE Specifications subject to change without notice. DATA SHEET #: INT Hc081 PAGE 2 OF 2 REV: 03 DATE: 3/8/02 a Copyright 2001 Connor-Winfield all rights reserved.