COSMO KL195W05

PRODUCT
SPECIFICATION
DATE: 08/12/2008
cosmo
SMD LED :
ELECTRONICS CORPORATION
KL195W05
NO. 61L04005
REV.
1
SHEET 1 OF 9
Features
Package: 1.6x0.8x0.6mm(0603) standard package
Feature of the device: extremely wide viewing angle; ideal for backlighting and coupling
in light guides
Wavelength: , 630nm(Red),470nm(Blue)
Viewing angle: Extremely Wide( 120∘)
Grouping parameter: luminous intensity
Assembly methods: suitable for all SMT assembly methods
Soldering methods: IR reflow soldering
Taping: Package in 8mm tape on 7” diameter reel
Package Dimensions
PRODUCT
SPECIFICATION
DATE: 08/12/2008
cosmo
SMD LED :
ELECTRONICS CORPORATION
NO. 61L04005
REV.
1
SHEET 2 OF 9
KL195W05
Absolute Maximum Ratings
At Ta = 25˚C
Parameter
KL-195W05
B
Unit
R
Power Dissipation
mW
80
72
Peak Forward Current
100
mA
Forward Current
30
mA
Reverse Voltage
5
V
(1/10 Duty Cycle, 0.1ms Pulse Width)
Operating Temperature Range
-25˚C ~+ 80˚C
Storage Temperature Range
-30˚C ~+ 85˚C
Wave Soldering Condition
240˚C For 10 Seconds
PRODUCT
SPECIFICATION
DATE: 08/12/2008
SMD LED :
cosmo
NO. 61L04005
KL195W05
ELECTRONICS CORPORATION
SHEET 3 OF 9
REV.
1
Electrical & Optical Characteristics
At Ta = 25˚C
Parameter
Luminous
Intensity
Blue
Symbol
PART NO
Iv
KL-195W05
40
60
-
60
75
-
Blue / Red
-
120
-
Blue
Red
Blue
Red
-
470
630
30
20
-
Blue
-
3.4
3.8
Red
-
2.0
2.4
Blue / Red
-
-
Red
Viewing Angle
2θ1/2
Dominant Wavelength
λd
Spectral Line Half-Width
Δλ
Forward Voltage
VF
Reverse Current
Ir
Min. Typ. Max. Unit
Test Condition
mcd
IF = 20mA
Note 1
deg
Note 2
nm
IF = 20mA
Note 3
nm
-
V
IF = 20mA
100 μ A
VR = 5V
Note :
1. Luminous intensity is measured with a photo detector and filter combination that follows the
CIE ete - response curve. And the equipment measured luminous intensity torellance is ±5%.
2. θ1/2 is the off - axis angle at which the luminous intensity is half the axial luminous intensity.
3. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents
the color of the device.
4. Caution in ESD:Static Electricity maybe cause damages to the LED. It is recommend to use a
wrist band oranti - electrostatic glove when handing the LED. All devices, equipment and
machinery must be properly grounded.
PRODUCT
SPECIFICATION
DATE: 08/12/2008
SMD LED :
cosmo
NO. 61L04005
KL195W05
ELECTRONICS CORPORATION
REV.
1
SHEET 4 OF 9
The Reliability criteria of SMD LED
Item
Symbol
Test Condition
Forward Voltage
VF
Reverse Current
Light Integrity
Limit
Min
Max
IF=20mA
–
U.S.L*1.1
IR
VR=5V
–
U.S.L*2.0
Φv
IF=20mA
ITV*0.7
–
*U.S.L: Upper Standard Level
*ITV : Initial Test Value
Results of Reliability Test
ClassiNO
fication
Mechanical
Test
Environment Test
Life
Test
Test Item
Standard
Test Method
Test Condition
Test
Sample
Ac/Re
Hours/Cycles NO
Operating
Constant urrent=20mA
MIL-STD-750D1026
Life Test
TA = 25OC
1000 HRS
22
PCS
0 / 22
High
2 Temperature MIL-STD-883:1008 Temperature=105OC±5 OC
Storage
1000HRS
22
PCS
0 / 22
1000HRS
22
PCS
0 / 22
1000HRS
22
PCS
0 / 22
10Cycles
22
PCS
0 /22
100Cycles
22
PCS
0 /22
Time=
10 sec±1sec
22
PCS
0 /22
Time=
5 sec±1sec
22
PCS
0 /22
1
Low
3 Temperature
Storage
High
Temperature
4
/ High
Humidity
Temperature
5
Cycling
Test
MIL-STD-883:1009 Temperature=-55OC±5 OC
MIL-STD-883E
TA = 85 OC
85%RH
MIL-STD-202:107D
105 OC~25 OC~-55 OC~25 OC
MIL-STD-750:1051
30mins~5mins~30mins~5mins
MIL-STD-883:1010
6
MIL-STD-202:107D
Thermal
85 OC±5 OC &- 40 OC±5 OC
MIL-STD-750:1051
Shock Test
(10mins)
(10mins)
MIL-STD-883:1011
7
Resistance
MIL-STD-202:210A
Soldering
TA = 260±5 OC
MIL-STD-750:2031
Heat Test
8 Solderability
MIL-STD-883E
Method 2003.7
TA =230OC±5 OC
PRODUCT
SPECIFICATION
DATE: 08/12/2008
SMD LED :
cosmo
NO.61L04005
REV.
1
SHEET 5 OF 9
KL195W05
ELECTRONICS CORPORATION
Typical Electro-Optical Characteristics Curves
(25oC Ambient Temperature Unless Otherwise Noted)
RELATIVE INTENSITY VS.
WAVELENGTH
Blue
100
Red
80
Irel
60
40
20
0
400
500
450
550
600
650
700
λ
FORWARD CURRENT VS.
FORWARD VOLTAGE
RELATIVE LUMINOUS INTENSITY
VS. FORWARD CURRENT
2
50
1.5
Iv
40
1
Blue
IF 30
Red
20
0.5
10
0.0
0
1.2
1.6
2.0
2.4
2.8
3.2
VF
3.6
4.0
0
10
20
30
IF
40
PRODUCT
SPECIFICATION
DATE: 08/12/2008
SMD LED :
cosmo
NO. 61L04005
KL195W05
ELECTRONICS CORPORATION
FORWARD CURRENT DERATING CURVE
REV.
1
SHEET 6 OF 9
SPATIAL DISTRIBUTION
40
0°
10° 20°
30°
40°
30
50°
IF 25
20
60°
1.0
10
70°
80°
0.9
0
0
20
40
60
80
90°
100 ° C
T
0.7
0.5
0.3
0.1
0.2
0.4
0.6
0.8
Method of Taping / Polarity and Orientation
Packing unit 3000/reel
Unit : mm
Direction
U: Taping upward
Notes: All dimensions are in millimeters (inches)
D: Taping downward
PRODUCT
SPECIFICATION
DATE: 08/12/2008
cosmo
ELECTRONICS CORPORATION
SMD LED :
KL195W05
NO. 61L04005
SHEET 7 OF 9
REV.
1
Package Dimensions of Reel
Unit: mm
Packaging
Product lable
CUSTOMER:
CUSTOMER P/N:
DEVICE TYPE:
BIN:
COLOR RANK:
LOT NO:
QTY:
CAUTION: After open the aluminum laminate bag the lamps should be storage in the Follow
condition
Temperautre:5 to 30 OC,Humidity:70%,Storage time:72hrs max
Backing condition :If backing is necessary , we recommended the backing condition is 60 +/- 5 OC
10hours
PRODUCT
SPECIFICATION
DATE: 08/12/2008
cosmo
ELECTRONICS CORPORATION
SMD LED :
NO. 61L04005
KL195W05
REV.
1
SHEET 8 OF 9
Packing
CUSTOMER:
CUSTOMER P/N:
DEVICE TYPE:
BIN:
COLOR RANK:
LOT NO:
QTY:
Cautions for use
Over-current-proof
Customer must apply resistors for protection ,others slight voltage shit will cause big current change
(Burn out will happen).
Storage time
The operation of temperature and RH are : 5 OC ~35 OC,RH60%.
Once the package is opened , the products should be used within a week.
Otherwise , they should be kept in a damp proof box with descanting agent.
Considering the tape life , we suggest our customers to use our products within a year(from
production date)
If opened more than one week in an atmosphere 5 OC ~35 OC , RH60% , they should be treated at
60 OC ±5 OC for 15 hrs.
COSMO-lnnotek will not be held responsible for any damage to the user that may result from
accidents or any other reasons during operation of the user’s unit if use to exceed the absolute
maximum ratings, or not keep the matters that demand special attention.
PRODUCT
SPECIFICATION
DATE: 08/12/2008
cosmo
ELECTRONICS CORPORATION
SMD LED :
NO. 61L04005
KL195W05
SHEET 9 OF 9
REV.
1
Others
Soldering Heat Reliability
Available for Pb free soldering process
Please refer to the following figure :
5 sec
Temp
(° C)
260
230
150
120
4°C/s max
Preheat
Time
60~120sec
30~50sec
Soldering Iron
Basic spec is ≦5sec when 260 OC. If temperature is higher, time shorter ( +10 OC → -1sec ).
Power dissipation of Iron should be smaller than 15W, and temperature should be controllable.
Surface temperature of the device should be under 230 OC.
Rework
Customer must finish rework within 5sec under 245 OC.
The head of Iron can not touch copper foil.
Twin-head type is preferred.