The 3CX6000A7/YU-148 high-mu, forced air cooled power triode provides relatively high power output as an amplifier, oscillator, or modulator at low plate voltages. The tube has a low inductance cylindrical filament stem structure which readily becomes part of a linear filament tank circuit for VHF operation. The grid provides shielding between the input and output circuits for grounded grid applications and conveniently terminates in a ring between the plate and filament terminals. Characteristics Plate Dissipation (Max.) Screen Dissipation (Max.) Grid Dissipation (Max.) Frequency for Max. rating (CW) Amplification Factor Filament/Cathode Voltage Current Capacitance Input Output Feedthrough Capacitance Input Output Feedthrough Cooling Base Air Socket Air Chimney Boiler Length Diameter Weight 6,000 Watts N/A 225 Watts 110 MHz 200 Thoriated Tungsten 7.0 Volts 78.0 Amps Grounded Cathode 42.0 pf 0.28 pf 24 pf N/A N/A N/A N/A Forced Air Special, Coaxial N/A N/A N/A 9.00 in; 22.86 cm 6.125 in; 15.56 cm 9.1 lb; 4.1 kg Maximum RatingsTypical Operation Class of Type of ServicePlate PlatePlateScreenPlate Operation VoltageCurrent Voltage VoltageCurrent (Volts) (Amps) (Volts) (Volts) (Amps) C RF Amplifier 7,000 3.5 5,700 --- 2.5 Drive Output PowerPower (Watts) (kiloWatts) 600 10.0 The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI MPP products, visit our website at: www.cpii.com, or contact: CPI Microwave Products Division, Eimac Operation,607 Hansen Way, Palo Alto, CA 94303 telephone : 1(800) 414-8823. fax : (650) 592-9988 | email : [email protected] CPI | 3CX6000A7 4CW50,000J/ YU-148 3CX6000A7 / YU-148