CPI Microwave Power Products (MPP) offers klystrons for particle accelerator applications. The VKL-7966A is a 1.497 GHz, 100 kW CW klystron for the injector stage of the Free Electron Laser (FEL) Driver Accelerator at Thomas Jefferson National Accelerator Facility. Key Features • • • • Diode Electron gun 6-cavity rf circuit Single output window, WR-650 Waveguide Flange Collector capable of dissipating the entire beam power Typical Operating Parameters Power Output Beam Voltage Beam Current Frequency -1dB Bandwidth Saturated Gain Efficiency Collector Coolant Flow Body Coolant Flow Solenoid: Current Voltage Current Flow Size: Klystron Height Klystron Weight Solenoid Height Solenoid Diameter Solenoid Weight 110 33.5 6.5 1.497 14 55.5 51 65 / 250 5 / 20 kWatts kV A GHz MHz dB % gpm / l/m gpm / l/m 22 86 2/8 A V gpm / l/m 58 / 148 350 / 160 23 / 58 18 / 46 375 / 170 inches / cm pounds / kg inches / cm inches / cm pounds / kg For information on Super Power Klystrons and other CPI MPP products, visit our website at www.cpii.com/mpp, or contact: CPI Microwave Power Products Division, 607 Hansen Way, Palo Alto, CA 94303 Telephone: 650-846-3900, Fax: 650-856-0705, Email: [email protected] Typical Operating Characteristics Transfer Curve Frequency Response Data taken at a beam voltage of 33.5 kV Incremental Gain When the klystron is operating at either the 80kW or 40kW output power level and the RF drive is changed by 1 dB, there must be a corresponding output power change of 0.5 dB or greater. For information on Super Power Klystrons and other CPI MPP products, visit our website at www.cpii.com/mpp, or contact: CPI Microwave Power Products Division, 607 Hansen Way, Palo Alto, CA 94303 Telephone: 650-846-3900, Fax: 650-856-0705, Email: [email protected]