200W Compact Low Power Amplifier for Satellite Communications C-Band The VZC-6962E2 C-Band 200 Watt TWT Low Power Amplifier— high efficiency in a compact package. Easy to Maintain Provides 200 watts of power in a 3 rack unit package, digital ready, for wideband, single- and multi-carrier satellite service in the 5.850-6.650 GHz frequency band. Ideal for transportable and fixed earth station applications where space and prime power are at a premium. Modular design and built-in fault diagnostic capability with convenient and clearly visible indicators behind front panel door for easy maintainability in the field. Efficient Employs a high efficiency dual-depressed collector helix traveling wave tube backed by many years of field-proven experience in airborne and military applications. Worldwide Support Backed by over three decades of satellite communications experience, and CPI’s worldwide 24-hour customer support network that includes fourteen regional factory Service Centers. Simple to Operate User-friendly microprocessor-controlled logic with integrated computer interface. Digital metering, pin diode attenuation and optional integrated linearizer for improved intermodulation performance. Global Applications Meets International Safety Standard EN-60215, Electromagnetic Compatibility 89/336/EEC and Harmonic Standard EN-61000-3-2 to satisfy worldwide requirements. 811 Hansen Way P.O. Box 51625, Palo Alto, CA 94303 tel: +1 (650) 846-3803 fax: +1 (650) 424-1744 e-mail: [email protected] www.cpii.com/satcom 200W Compact Low Power Amplif ier Compact C-B a n d SPECIFICATIONS, VZC-6962E2 Electrical OPTIONS: • Remote Control Panel Electrical (continued) TWT Model Number VTC-6265M3 Frequency 5.850 to 6.650 GHz Output Power TWT Flange 200 W min. (53.01 dBm) 175 W min. (52.43 dBm) Bandwidth 800 MHz Gain 73 dB min. at rated power output; 75 dB min. at small signal RF Level Adjust Range 0 to 20 dB Gain Stability ±0.25 dB/24hr max. (at constant drive and temp.) • Integral Linearizer • Redundant and Power Combined Subsystems • Extended Frequency (5.850 to 7.075 GHz, Model Number VZC-6962EB) • External Receive Band Reject Filter (Increases loss by a minimum of 65 dB, up to 4.8 GHz) Small Signal Gain Slope ±0.02 dB/MHz max. Small Signal Gain Variation (max.) 0.6 dB pk-pk across any 40 MHz band; 2.5 dB pk-pk across the 800 MHz band Input VSWR 1.3:1 max. Output VSWR 1.3:1 max. Load VSWR 2.0:1 max. operational; any value for operation without damage Residual AM -50 dBc below 10 kHz -20[1.3 +log F(kHz)] dBc, 10 kHz to 500 kHz -85 dBc above 500 kHz Phase Noise IESS Phase Noise Profile AC Fundamental Sum of All Spurs AM/PM Conversion -6 dBc -36 dBc -47 dBc 2.0°/dB max. for a single carrier at 8 dB below rated power 0.85 kVA typ. 1.0 kVA max. Power Factor 0.95 min. Environmental (Operating) Ambient Temperature -10° to +50°C operating -40° to +70°C non-operating Relative Humidity 95% non-condensing Altitude 10,000 ft. with standard adiabatic derating of 2°C/1000 ft., operating; 40,000 ft., non-operating Shock and Vibration Designed for normal transportation environment per Section 514.4 MIL-STD-810E. Designed to withstand 20G at 11 ms (1/2 sine pulse) in non-operating condition. Acoustic Noise 65 dBA @ 3 ft. from amplifier Mechanical Cooling (TWT) Forced air with integral blower Rear air intake & exhaust RF Input Connection Type N female RF Output Connection CPR 137 waveguide flange, grooved, threaded UNF 2B 10-32 RF Output Monitor Type N female Dimensions (W x H x D) 19 x 5.25 x 24 in. (483 x 133 x 610 mm) Noise and Spurious (at rated gain) <-130 dBW/4 kHz from 3.4 to 4.2 GHz <-65 dBW/4 kHz from 4.2 to 12.0 GHz <-110 dBW/4 kHz from 12.0 to 40.0 GHz Weight 70 lbs (31.8 kg) max. Noise Figure 10 dB max. Intermodulation -24 dBc max. with two equal carriers at total output power 7 dB (4 dB with optional integral linearizer) below rated single-carrier output Group Delay (in any 40 MHz band) 0.01 ns/MHz linear max. 0.001 ns/MHz 2 parabolic max. 0.5 ns pk-pk ripple max. For more detailed information, please refer to the corresponding CPI Technical Description. Note: Specifications may change without notice as a result of additional data or product refinement. Please contact CPI before using this information for system design. PDF Power Consumption -60 dBc at rated power, second and third harmonics Certificate Number: 30515 07/06 100 - 240 VAC ±10%, single phase 47- 63 Hz Harmonic Output KEEPING YOU ON THE AIR not up in the air MKT 42, ISSUE 8 Primary Power