CRYDOM SPA4191

SPA Series
• Mini-SIP SSR
• Ratings to 1A @ 280 VAC
• SCR output
• DC control
• Zero-crossing (resistive loads) output
• 10-35mA current-control input
PRODUCT SELECTION
Control Voltage
10-35 VDC
1A
1A
SPA4191
SPA6191
20-140
400
0.01
500
1.0
0.025
30
1.5
0.5
20-280
600
0.01
500
1.0
0.025
30
1.5
0.5
OUTPUT SPECIFICATIONS (1)
Description
Operating Voltage (47-63Hz) [Vrms]
Transient Overvoltage [Vpk]
Maximum Off-State Leakage Current @ Rated Voltage [mArms]
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (3)
Maximum Load Current [Arms](3)
Minimum Load Current [Arms]
Maximum Surge Current (16.6ms) [Apk]
Maximum On-State Voltage Drop @ Rated Current [Vpk]
Minimum Power Factor (with Maximum Load)
INPUT SPECIFICATIONS (1)
Description
DC Control
Control Current Range
Must Turn On Current
Must Turn Off Current
Maximum Turn-On Time [msec]
Maximum Turn-Off Time [msec]
10-35 VDC
10 mA
1 mA
1/2 cycle
1/2 cycle
GENERAL SPECIFICATIONS
Description
Parameters
Dielectric Strength, Input/Output/Base (50/60Hz)(2)
Minimum Insulation Resistance (@ 500 VDC)(2)
2500 Vrms
109 Ohm
Maximum Capacitance, Input/Output
Ambient Operating Temperature Range
Ambient Storage Temperature Range
Weight (typical)
Encapsulation
8.0 pF
-30 to 80°C
-30 to 125°C
0.15 oz. (4.3g)
Thermally Conductive Epoxy
GENERAL NOTES
1) All parameters at 25°C unless otherwise specified.
2) Dielectric and insulation resistence are measured between input and output
3) Off-State dv/dt test method per EIA/NARM standard RS-443
For Contact information visit our web
site.
www.crydom.com
©2008 Crydom, Inc.
Specifications subject to change without notice.
MECHANICAL SPECIFICATIONS
DC C ONTROL
PIN 1: AC LOAD
PIN 2: AC LOAD
PIN 3: +DC CONTROL
PIN 4: -DC CONTROL
THERMAL DERATE INFORMATION
For Contact information visit our web
site.
www.crydom.com
©2008 Crydom, Inc.
Specifications subject to change without notice.
For Contact information visit our web
site.
www.crydom.com
©2008 Crydom, Inc.
Specifications subject to change without notice.
ANNEX - ENVIROMENTAL INFORMATION
For Contact information visit our web
site.
www.crydom.com
©2008 Crydom, Inc.
Specifications subject to change without notice.