January 2, 2007 SMD INDUCTOR DR355-3 SERIES Features z z z z z Low Profile Surface Mount Design Suitable for Reflow soldering Inductance Range from 22nH to 120nH Operating Temp. -40°C to +125°C Tinned Leads with Leaded Solder is Available (note 3) ELECTRICAL SPECIFICATIONS AT 25ºC PART NO. DR355-3-223 DR355-3-273 DR355-3-333 DR355-3-393 DR355-3-473 DR355-3-563 DR355-3-683 DR355-3-823 DR355-3-104 DR355-3-124 INDUCTANCE (nH) @ 0A @150MHz 22±5% @150MHz 27±5% @150MHz 33±5% @150MHz 39±5% @150MHz 47±5% @150MHz 56±5% @150MHz 68±5% @150MHz 82±5% @150MHz 100±5% @150MHz 120±5% DCR (mΩ) MAX. 4.2 4.0 4.8 4.4 5.6 6.2 8.2 9.4 12.3 17.3 MAX. RATED CURRENT (A) (TYP.) 3.0 3.5 3.0 3.0 3.0 3.0 2.5 2.5 1.7 1.5 . MECHANICAL OUTLINES Typical Response Curves for DR355s NOTES: 1. 2. 3. 4. All dimensions shown are in “mm”. Tape and reel quantity, 750 pcs/reel For non-RoHS parts replace DR prefix with 42- (e.g. DR355-3 becomes 42-355-3) Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020C. DATATRONIC: 28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice.