S2A – S2M 2.0A SURFACE MOUNT GLASS PASSIVATED RECTIFIER Features ! Glass Passivated Die Construction ! ! ! ! ! ! Ideally Suited for Automatic Assembly Low Forward Voltage Drop Surge Overload Rating to 60A Peak Low Power Loss Built-in Strain Relief Plastic Case Material has UL Flammability Classification Rating 94V-O B D A F C H SMB/DO-214AA Dim Min Max A 3.30 3.94 B 4.06 4.70 C 1.91 2.11 D 0.152 0.305 E 5.08 5.59 F 2.13 2.44 G 0.051 0.203 H 0.76 1.27 All Dimensions in mm Mechanical Data ! ! ! ! ! Case: Molded Plastic Terminals: Solder Plated, Solderable per MIL-STD-750, Method 2026 Polarity: Cathode Band or Cathode Notch Marking: Type Number Weight: 0.093 grams (approx.) Maximum Ratings and Electrical Characteristics Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TL = 110°C G E @TA=25°C unless otherwise specified Symbol S2A S2B S2D S2G S2J S2K S2M Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 2.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 60 A Forward Voltage @IF = 2.0A VFM 1.10 V @TA = 25°C @TA = 125°C IRM 5.0 200 µA Reverse Recovery Time (Note 1) trr 2.5 µS Typical Junction Capacitance (Note 2) Cj 30 pF RJL 16 K/W Tj, TSTG -55 to +150 °C Peak Reverse Current At Rated DC Blocking Voltage Typical Thermal Resistance (Note 3) Operating and Storage Temperature Range Note: 1. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A, 2. Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC. 3. Mounted on P.C. Board with 8.0mm2 land area. 2.0 1.5 1.0 0.5 Resistive or inductive load 0 20 40 60 80 100 120 140 160 IF, INSTANTANEOUS FORWARD CURRENT (A) IAV, AVERAGE FORWARD CURRENT (A) 2.5 10 1.0 0.1 Tj = 25°C IF PULSE WIDTH = 300 µS 0.01 0.5 TL , LEADTEMPERATURE (ºC) Single Half-Sine-Wave JEDEC Method 50 40 30 20 10 0 100 NUMBER OF CYCLES AT 60 Hz Fig. 3 Forward Surge Current Derating Curve IR, INSTANTANEOUS REVERSE CURRENT (µA) IFSM , PEAK FORWARD SURGE CURRENT (A) 1.1 1.3 1.5 Fig. 2 Typical Forward Characteristics 60 10 0.9 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 1 Forward Current Derating Curve 1 0.7 1000 100 Tj = 125°C 10 1.0 Tj = 25°C 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics