17HE Series RoHS Compliant MIL-C-24308-Compatible High-Density Crimp Type FEATURE ●High-density D-sub connector compatible to MIL-C-24308. It is called “high-density” because 9-con- tacts shell contains 15 contacts. ●Receptacles (socket contact) come in three types : conventional “L-shaped DIP type” , and space-sav- ing “L-shaped DIP type” and “SMT type” . ●The space-saving types are lower by 2mm in mounting height than the conventional type, and best suited to high-density mounting because the area (front and back) they occupy on PCB is smaller by 50% or 70% in the case of L-shaped DIP- or SMT-type, respectively, than conventional ones. ● Plug (pin contact) consists of crimp-type press-contacts, and is compatible with three types of cables (AWG 30, 28 and 26) and existing 17JE type hood. SPECIFICATION Voltage Rating 250V AC (r.m.s.) Current Rating 1A/Contact Dielectric Withstanding Voltage 1,000V AC (r.m.s.)/for 1 minute Insulation Resistance 5,000MΩ min. at 500V DC Contact Resistance 20mΩ max. Wire Accommodation AWG30, 28, 26, 24 InsulatorJacket Diam.φ0.8 to φ1.21 MATERIAL/FINISH P/N MATERIAL/FINISH Block PBT resin/(UL94V-0)/color black PPS resin/(UL94V-0)/color black Shell Brass/Nickel Plating Contact Copper alloy/Mating area : Gold over Nickel Plating, Tail area : Sn-Ag over Nickel Plating Hood ABS resin/Nickel Plating Cautions about Use Use connector on a panel fixed on PCB by fastening it on the panel with small screws or engaging block 1 ● ● Ｌ 17HE 17HE Series Unit : mm ■Receptacle Connector [Without Jack Socket] 17HE-R13150-73-FA CONNECTOR STYLE R : Right angle DIP type B : Space-Saving Right angle DIP type C : Space-Saving Right angle SMT type Ground Tab Type P.C.B thickness <Tail shape R> NO.OF.CONTACTS 15 N : None － 1 : M3×0.5 tapping-hole ground tab － 2 : φ3.4 through-hole ground tab CONTACT PLATENG 7 : Mating area : 0.4μm Gold over Nickel plating Tail area : Sn-Ag over Nickel plating 8 : Mating area : Gold flash over Nickel plating Tail area : Sn-Ag over Nickel plating － 3 : M3×0.5 tapping-hole ground tab t＝1.6 ＋ 0.25 － 0.15 4 : M2.6×0.45 tapping-hole ground tab t＝1.6 ＋ 0.25 － 0.15 5 : Through-hole lock pin ground tab t＝1.6 ＋ 0.25 － 0.15 6 : ♯4-4OUNC tapping-hole ground tab t＝1.6 ＋ 0.25 － 0.15 <Tail shape B> 0 :φ2.4 through-hole ground tab － 4 : Lock Pin Ground Tab t＝1.6 ＋0.25 －0.15 5 : Lock Pin Ground Tab t＝1.2 ±0.19 6 : Lock Pin Ground Tab t＝1.0 ±0.18 <Tail shape C> 0 : φ2.4 through-hole ground tab Ｌ 17HE 2 ● ● － 1 : Single Lock Pin Ground Tab t＝1.6 ＋ 0.25 － 0.15 2 : Single Lock Pin Ground Tab t＝1.2 ± 0.19 3 : Single Lock Pin Ground Tab t＝1.0 ± 0.18 17HE Series Unit : mm ■Receptacle Connector [With Jack Socket] 17HE-B13150-73HA2-CA CONNECTOR STYLE R : Right angle DIP type B : Space-Saving Right angle DIP type C : Space-Saving Right angle SMT type Event that uses Jack Socket : CA METHOD OF DELIVERY (Jack Socket) 1 : With Jack socket (UN-assenbled) 2 : With Jack socket (assenbled) NO.OF.CONTACTS 15 JACK SOCKET THREAD SIZE A : M2.6×0.45 (Standard) B : M3×0.5 C : ＃4-40UNC CONTACT PLATENG 7 : Mating area : 0.4μm Gold over Nickel plating Tail area : Sn-Ag over Nickel plating 8 : Mating area : Gold flash over Nickel plating Tail area : Sn-Ag over Nickel plating DIMENSION B, OF JACK SOCKET H : Jack Socket (17L-003X26-CF) (Panel thickness : 0.9～1.3mm) K : Jack Socket(17L-003X32-CF) (Panel thickness : 0.5～0.8mm) Ground Tab Type P.C.B thickness <Tail shape R> N : None － 1 : M3×0.5 tapping-hole ground tab － 2 : φ3.4 through-hole ground tab － t＝1.6 ＋ 0.25 － 0.15 4 : M2.6×0.45 tapping-hole ground tab t＝1.6 ＋ 0.25 － 0.15 5 : Through-hole lock pin ground tab t＝1.6 ＋ 0.25 － 0.15 6 : ♯4-4OUNC tapping-hole ground tab t＝1.6 ＋ 0.25 － 0.15 3 : M3×0.5 tapping-hole ground tab <Tail shape B> 0 : φ2.4 through-hole ground tab － 4 : Lock Pin Ground Tab t＝1.6 ＋0.25 －0.15 5 : Lock Pin Ground Tab t＝1.2 ±0.19 6 : Lock Pin Ground Tab t＝1.0 ±0.18 <Tail shape C> 0 : φ2.4 through-hole ground tab Ｌ － 1 : Single Lock Pin Ground Tab t＝1.6 ＋ 0.25 － 0.15 2 : Single Lock Pin Ground Tab t＝1.2 ± 0.19 3 : Single Lock Pin Ground Tab t＝1.0 ± 0.18 17HE 3 ● ● 17HE Series Unit : mm 15-φ1+0.1 -0 16.3 24.99 11.43 2.54 3.2 3.2 24.99 mating side 0.25 ± 0.05 2.286 ± 0.05 1.143 ± 0.05 24.99 ± 0.05 2.54 15.2 5 11.43 6.1 φ3.1 φ5.5 Land 2.54 ± 0.05 30.8 2-φ3.2 ± 0.1 11 以下 10° 2.54 ± 0.05 7.8 12.5 ■Right-Angle Receptacle Connector P.C.B. Mounting Dimensions ( Connector Mounting Side) ■Space-Saving Right-Angle Receptacle Connector 2.5 Shell : φ3.1 Hole Ground tab : M3 × 0.5 thread 0.5 E Mark P.C.B thickness 17HE-B13150-□4-FA 3.2 A t＝1.6 17HE-B13150-□5-FA 2.8 B t＝1.2 17HE-B13150-□6-FA 2.6 C t＝1.0 2.4 P/N 12 7.8 9 16.3 24.99 6 8.6 4 6.17 30.8 24.99 φ2.4 Hole E 4.5 4.5 10.5 A A (P.C.B mounting) 1 φ1.5 (P.C.B mounting) 0.3 15.98 3 ± 0.1 6.5 15.98 ± 0.05 15.98 ± 0.05 φ2.4 ± 0.1 Hole φ0.7 ± 0.05 Hole φ0.7 ± 0.05Hole 4 ● ● φ3.2 ± 0.05 Hole 4.548 ± 0.1 1.143 ± 0.05 φ1.6 ± 0.05 Hole 1.5 ± 0.1 2 3.495 ± 0.05 3 ± 0.1 1.143 ± 0.05 4.548 ± 0.1 4.51 ± 0.1 2.54 ± 0.05 10.287 ± 0.05 Land 1.5 ± 0.1 2 2.54 ± 0.05 10.287 ± 0.05 24.99 ± 0.1 φ1.6 ± 0.05 Hole 3.024 ± 0.1 24.99 ± 0.1 Lock Pin Ground Tab Type 3.024 ± 0.1 Through-hole Ground Tab Type 4 17HE M3 × 0.5 thread 3 Ｌ CLASSIFICATION MARKING OF APPLICABLE P.C.B THICKNESS φ5.5 Land (Installed on the back) 17HE Series Unit : mm ■Space-Saving Right-Angle SMT Receptacle Connector 2.5 0.5 * With single lock-pin ground-tab type, attach single lock-pin to PCB first, then double lock-pin to complete mounting. (Mounting is easier, requiring only about a half of force for insertion.) 0.3 4.2 12 7.8 Shell : φ3.1 Hole Ground tab : M3 × 0.5thread 16.3 24.99 P.C.B 0.3 φ2.4Hole 6± 0.5 7.6 4 6 8.5± 0.5 6.17 30.8 5.6 24.99 M3 × 0.5 thread 4.5 CLASSIFICATION MARKING OF APPLICABLE P.C.B THICKNESS Double Lock Pin A A (P.C.B mounting) E 4.5 1 10.5 Single Lock Pin φ1.5 15.98 (P.C.B mounting) Single Lock Pin Ground Tab Type Through-hole Ground Tab Type E Mark P.C.B thickness 17HE-C13150-□1-FA 4.0 A t＝1.6 17HE-C13150-□2-FA 3.6 B t＝1.2 17HE-C13150-□3-FA 3.4 C t＝1.0 P/N Lock Pin Ground Tab (5) (Back Face) Terminal No. (24.99) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 φ5.5 Land Arrangement of terminal Nos. (Front Face) Through-hole ground tab type 24.99 ± 0.1 2 2.54 ± 0.05 10.668 ± 0.05 Land 15.98 ± 0.1 3.7 3 ± 0.1 3 4 1.5 R2.8 Land 6.5 4 φ2.4 ± 0.1Hole 5 ● ● 3.7 3 ± 0.1 0.762 ± 0.05 0.5 ± 0.03 φ1.6 ± 0.05 Hole φ1.6 ± 0.05 Hole 1.5 2 2.54 ± 0.05 10.668 ± 0.05 4.5 ± 0.1 0.762 ± 0.05 4 24.99 ± 0.1 4.5 ± 0.1 0.5 ± 0.03 15.98 ± 0.1 φ3.2 ± 0.05 Hole locator hole Ｌ 17HE 17HE Series Unit : mm PCB Mounting Dimensions (mounted on the back) Connector cannot be fixed on panel. Type2 Type3 Connector cannot be fixed on panel. Connector cannot be fixed on panel. 24.99 34.09 2-φ3.2 ± 0.1 20.5 min. 4-R2.5 4-R3.4 +0.3 10 -0 6.5 ± 0.2 13 min. R 4-R1 24.99 ± 0.1 18.5 ± 0.3 +0.3 31.0 -0 11.4 min. Type1 10° 11.83 11.73 11.83 11.43 11.43 Shape of Ground Tab Type2 Type3 Through-hole ground tab (press-fit) Designation : 17L-004H Material/finish : Cu/Ni-plating Note) Cannot be used in combination with stud 17L-002□ Lock pin ground tab with tapping hole (press-fit) Designation : 17L-004E-FA Material/finish : Cu alloy/solder-plating Note) Cannot be used in combination with stud 17L-002□ ♯ 4-40UNC φ3.2 Hole Type5 Type6 Lock pin ground tab with through-hole (press-fit) Designation : 17L-004C-FA Material/finish : Cu alloy/solder-plating Note) Cannot be used in combination with jack socket 17H-003A-□□. 3 Type1 Tapping-hole ground tab (press-fit) Designation : 17L-004K Material/finish : Cu/Ni-plating Note) Cannot be used in combination with stud 17L-002□ 6.25 6.25 M3 × 0.5 3 M3 × 0.5 M3 × 0.5 3 6.25 φ3.4 Hole M3 × 0.5 #4-4OUNC thread Designation : 17L-004V-FA Material/finish : Cu alloy/Sn-Ag plating Note) Cannot be used in combination with stud 17L-002□. Engaging Block ●Jack Socket (material/finish : brass/Ni-plating) (Type fastened to panel from both sides) 17HE 17L-003□26-CF 4.8 0.9～1.3 17L-003□32-CF 5.3 0.5～0.8 G 5 G H :Panel thickness H 5.8 G M3 × 0.5 thread □ : Thread size A : M2.6×0.45(Standard) B : M3×0.5 C : ＃4-40UNC Panel thread ●Stud (Material/Finish ・ ・ ・ ・ Zn die-cast/Ni plating ・ Jack Socket(Material/Finish ・ ・ Brass/Ni Plate) B 5 P/N : 17L-002□ Mounting hole : type 1 8 5.8 Ｌ P/N 10.3 □ in the designation above stands for type of engaging screw. M3 × 0.5 thread thread P/N G H :Panel Hole 17H-003A-CF 4.8 Panel thickness : 0.9～1.3 Type3 17H-003A-CF 5.3 Panel thickness : 0.8max. Type3 17H-003A-CF 6.1 Not fastened to panel from both sides. Type2 6 ● ● 17HE Series Unit : mm ■Plug Connector (Crimp Type) 17HE-23150-C NO. OF CONTACTS 15 4.83 3.68 2.54 1.4 0.25 SHAPE OF BLOCK C : Crimp type 5.46 4.32 3.18 2.03 0.89 1.98 10.2 1.0 4.4 8.1 12.4 5.9 1.98 φ3.1 3 1 Contact 7 11 16 24.99 30.7 27.8 ■Crimp Pin Contact 17H-2PCR-102(P500) NO. OF CONTACTS P500 : 500 Contacts/Pack R10000 : 10000 Contacts/Reel CONTACT PLATENG 2 : Mating area : 0.4μm Gold over Nickel plating Tail area : Golde flash over Nickel plating 3 : Mating area : Gold flash over Nickel plating Tail area : Gold flash over Nickel plating R : Rear release type C : Crimp type P : Pin type Ｌ 5 1.39 17HE φ1.5 3.35 8.5 3 1.4 1.39 0.6 φ0.76 6.7 7 ● ● 0.8 17HE Series Tools ●Manual wiring tool Designation- 357J-14443 (compatible wires : AWG #26 to 30) ●Tool for inserting/removing contact Designation : 357J-10629 Contact-Removing side Contact-Inserting side ●Tool for erecting contact ratch Designation : 357J-10628 ●Semi-automatic crimping machine Stripper crimper Designation : AP-A13980 (including press unit) Power supply : AC100V (0.2kW) Weight : 88kg Ｌ 17HE 8 ● ● Crimper Designation : AP-A13981 (including press unit) Power supply : AC100V Weight : 45kg