DDK FF34-18A-R11B

0.4 mm Pitch Back-Lock FPC Connector
FF34 Series 【CE-ATA 8Bit Standard】
OUTLINE
・FF34 series is a FPC connector
which is 0.4mm pitch,1.0mm height
and 3.4mm depth.
・It is interface connector for smaller
than 1.8" HDD.
FEATURE
・ Conforming to CE-ATA 8bit standard (Host side)
・Front-acccess back lock design is short depth and suitable to compact device.
・Cable lock mechanism retains FPC.
・Connectors deliver with the lock lever opened. Time saving for FPC inserting operation.
・ Both upper and lower contacts design accepts any FPC inserting directions.
・ Back lock mechanism enables to retain FPC against pulling upward direction.
・The lock lever does not fall down to the opposite side.
・Nickel barrier prevents solder wicking.
Note Please do not close a lock lever without inserting FPC.
Otherwise, contact gap will become narrow and FPC insertion force will be higher.
APPLICATIONS
Portable HDD
SPECIFICATIONS
Rated Voltage
50V AC(r.m.s.)
Rated Current
0.5A / Contact
Dielectric Withstanding Voltage 200V AC(r.m.s.) / 1 minute
Insulation Resistance
100 M Ω min. at 500V DC
Contact Resistance
50m Ω max.
MATERIAL/FINISH
Item
090803
RoHS
Compliant
Compliant
Material / Finish
Contact
Copper Alloy /Au(Flash) over Ni Plating
Housing
LCP Resin (UL94V-0) / Ivory
Lock Lever
PPS Resin (UL94V-0) / Black
◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.
Your catalogue checking the latest speifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
FF34 Series
Unit：mm
○ CE-ATA 8Bit Standard Connector【HOST】
FF34-1 8 A -R11B
Part Number
①
②
③
④ ⑤ ⑥ ⑦
① Series
11.90
FF34
② Number of Contact
18 : 18 Contacts
③ Contact Posision
A：Upper and Lower Contact
④ Contact Style
R：Right Angle
⑤ Contact Pitch
1： 0.4mm
⑥ Contact Plating
1：Au(Flash) over Ni Plating
⑦ Lock Lever Type
B：with Cable Lock
10.87
4.20
10.10
0.02
3.40
0.04
2.98
0.04
4.20
0.04
3.40
1.00
3.40
0.10
0.12 0.03
0.10 X
0.40
0.04
（3.04）
0.35 0.05
0.10 X
X
0.55
10.90
2.05
0.40
0.22
2.05
0.12
0.40
0.03
0.07
6.80
0.10
R
4-
2.05
2.05
Pattern Prohibition Area
10.90
0.45 0.05
0.04 X
0.
R
0.80
4-
05
20
0.
0.20
20.70 0.05
0.10 X
0.27 0.03
0.06 X
Y
No.1 Contact
3.40
3.40
4.20
4.20
0.70 0.05
0.10 Y
10.05 0.05
X
Recommended FPC Dimensions
Recommended PCB Dimensions
・Recommended FPC Plating ： Au over Ni Plating
・Recommended Adhesive ： Heat Curing Adhesive
◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.
Your catalogue checking the latest speifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
2
Supporting Tape
0.20 0.03
0.40
.
R0
0.
1.40 0.30
0.70 0.05
0.95 0.05
3.00 min.
1.75 0.05
0.04 X
(3.40)
0.23 0.03
20
05
0.
0.40
05
20
0.
6.80
X
0.50 min.
No.18 Contaact
No.1 Contact
FF34 Series
Unit：mm
○ Package Specifications
21.5 TYP.
φ80 TYP.
φ328 TYP.
24.4 TYP.
30.4 max.
■ Reel Dimensions
User direction of feed
400mm min.
Tailer：20 Pockets min.
Empty component pockets
sealed with cover tape
Leader：15 Pockets min.
15000 Pockets
Empty component pockets
sealed with cover tape
User direction of feed
■ Emboss Tape Dimensions
+0.10
（24.00）
φ1.50 0
C
D
D
3.60 TYP.
Section C­C
Section D­D
■ Quantity：1500pcs./reel
◎ Specifications and/or dimenssions in this catalogue are subject to change without notice.
Your catalogue checking the latest speifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
3
24.0 0.30
12.3
22.25 min.
2.00
1.75
4.00
C
11.5
12.00