GBP2005 THRU GBP210 GLASS PASSIVATED BRIDGE RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 2.0 Ampere FEATURES GBP Glass passivated chip junction ● Reliable low cost construction utilizing molded plastic technique ● Ideal for printed circuit board ● Low reverse leakage current ● Low forward voltage drop ● High surge current capabiliy ● .110X45° (2.8) ● ● ● .150(3.8) .126(3.2) .417(10.60) .410(10.20) .043(1.1) .028(0.7) .106(2.7) .091(2.3) .610(15.5) .571(14.5) .056(1.42) .046(1.17) MECHANICAL DATA ● .580(14.75) .561(14.25) Case:Molded plastic, GBP Terminals : Terminals: Leads solderable per MIL-STD-202 method 208 guaranteed .034(.86) .030(.76) Epoxy: UL 94V-0 rate flame retardant Mounting Position: Any .160(4.06) .140(3.56) .024(0.6) .012(0.3) Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Symbol GBP 2005 GBP 201 GBP 202 GBP 204 GBP 206 GBP 208 GBP 210 Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 2.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 60 A Forward Voltage per leg VFM 1.1 V IR 5.0 500 µA Average Rectified Output Current @TC =105 °C Peak Reverse Current At Rated DC Blocking Voltage @IF = 2.0A @TA = 25°C @TA = 125°C Typical Thermal Resistance per leg (Note 1) R JA 38 °C/W Typical Thermal Resistance per leg (Note 2) R JL 13 °C/W -65 to +150 °C Operating and Storage Temperature Range Tj, TSTG Note: 1. Mounted on 75 x 75 x 3.0mm Al. plate. 2. Mounted on PCB at 9.5mm lead length with 12mm 2 copper pad. GBP2005 THRU GBP210 RATINGS AND CHARACTERISTIC CURVES FIG.2-MAXIMUM NON-REPETITIVE SUNRGE CURRENT FIG.1-FORWARD CURRENT DERATING CURVE 60 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT AMPERES 2.0 CASE AMBIENT 1.0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.00 20 0.1 0 40 60 100 80 120 140 PULSE WIDTH 8.3ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) 40 30 20 10 0 0 TEMPERATURE, °C 5 2 10 20 50 100 NUMBER OF CYCLETS AT 60Hz FIG.3-TYPICAL JUNCTION CAPACITANCE FIG.4-TYPICAL FORWARD CHARACTERISTICS 100 INSTANTANEOUS FORWARD CURRENT, (A) 10 1.0 10 T J=25 ,f=1MHZ 1.0 0.1 1.0 4.0 10.0 100 T J = 25! C 0.1 0.01 REVERSE VOLTAGE,(VOLTS) PULSE WIDTH 300us 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.5-TYPICAL REVERSE CHARACTERISTICS 1000 INSTANTANCEOUS REVERSE CURRENT, " u A) CAPACITANCE,(pF) 50 T J=150 100 T J=125 10 T J=100 1.0 0.1 T J=25 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) 1.8