KBL4005 THRU KBL407 SINGLE PHASE SILICON BRIDGE RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 4.0 Ampere FEATURES ● ● ● ● KBL / RS Ideal for printed circuit board Surge overload rating: 150A peak High case dielectric strength High temperature soldering guaranteed: 260°C/10 seconds at 5lbs. (2.3kg) tension .76 8(19 .5) .728(18.5) .587(14.9) .5 47(13 .9) MECHANICAL DATA .640(16.3) .600(15.2) .750 M IN. (19.0) .052(1.3)DI A. .048(1.2)T YP. Case: UL-94 Class V-0 recognized Flame Retardant Epoxy ● Terminals : Plated leads solderable per MIL-STD 202, method 208 ● Mounting Position: Any ● Marking: Type Number ● . 220(5.6) .180(4.6) . 087(2.2) .071(1.8) .256(6.5) .236(6.0) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current Symbol KBL 4005 KBL 401 KBL 402 KBL 404 KBL 405 KBL 406 KBL 407 Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V @TC = 75°C IO 4.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 150 A Forward Voltage (per element) @IF = 2.0A VFM 1.1 V Peak Reverse Current At Rated DC Blocking Voltage @TC = 25°C @TC = 100°C IR 10 1.0 µA mA I2t 166 A2s 19 K/W -65 to +150 °C Rating for Fusing (t < 8.3ms) (Note 1) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range R JC Tj, TSTG Note: 1. Non-repetitive for t > 1ms and < 8.3ms. 2. Thermal resistance junction to case per element mounted on PC board with 13.0x13.0x0.03mm thick land areas. KBL4005 THRU KBL407 RATINGS AND CHARACTERISTIC CURVES 20 IF, INSTANTANEOUS FWD CURRENT (A) IO, AVERAGE OUTPUT CURRENT (A) 5 4 3 2 1 Single Phase Half Wave 60 Hz Resistive or Inductive Load 0 20 40 60 80 100 120 140 1.0 0.1 0.01 0 TC, CASE TEMPERATURE (ºC) 200 150 100 50 8.3ms Single Half Sine-Wave JEDEC Method 10 NUMBER OF CYCLES AT 60 Hz IR, INSTANTANEOUS REVERSE CURRENT (µA) IFSM, PEAK FORWARD SURGE CURRENT (A) 250 1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics, per element Fig. 1 Forward Current Derating Curve 0 Tj = 25ºC Pulse Width = 300 µs 2% Duty Cycle 10 100 Fig. 3 Max Non-Repetitive Peak Fwd Surge Current 10 TC = 100°C 1.0 0.1 TA = 25°C 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics, per element