W005 THRU W10 SINGLE PHASE SILICON BRIDGE RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 1.5 Ampere FEATURES ● ● ● WOB Ideal for printed circuit board Surge overload rating: 50A peak High case dielectric strength MECHANICAL DATA Case: UL-94 Class V-0 recognized Flame Retardant Epoxy ● Terminals : Plated leads solderable per MIL-STD 202E, method 208C ● Mounting Position: Any ● Weight: 1.10 g ● Marking: Type Number ● MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. SYMBOL W005 W01 W02 W04 W06 W08 W10 UNITS Maximum Recurrent Peak Reverse Voltage V RRM 50 100 200 400 600 800 1000 V Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 CHARACTERISTICS o Maximum Average Forward Output Current at T A = 25 C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum DC Forward Voltage Drop per Bridge Element at 1.5A DC Maximum Reverse Current at rated @T A = 25 oC DC Blocking Voltage per element @T A = 125 o C I 2t Rating for Fusing (t<8.3ms) Typical Junction Capacitance ( Note1) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range V IO 1.5 A I FSM 50 A VF 1.0 V IR 10.0 500 uA I2t 10 CJ 24 R θJ A 36 0 -55 to + 150 0 T J, T STG NOTES : 1. Measured at 1 MHZ and applied reverse voltage of 4.0 volts 2. Thermal Resistance from Junction to Ambient and from junction to lead mounted on P.C.B. with 0.5 x 0.5" (13x13mm) copper pads. A 2 Sec pF C/W C W005 THRU W10 RATINGS AND CHARACTERISTIC CURVES FIG.2-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 1.8 1.5 1.2 0.9 Single Phase Half Wave 60Hz Resistive Or Inductive Load 0.6 0.3 0 0 25 50 75 100 125 150 175 CASE TEMPERATURE,( C) PEAK FORWARD SURGE CURRENT,(A) AVERAGE FORWARD CURRENT,(A) FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE 50 40 30 8.3ms Single Half Tj=25 C Sine Wave 20 JEDEC method 10 0 1 5 50 10 100 FIG.3-TYPICAL FORWARD FIG.4-TYPICAL REVERSE CHARACTERISTICS CHARACTERISTICS 50 50 10 10 REVERSE LEAKAGE CURRENT, (µA) INSTANTANEOUS FORWARD CURRENT,(A) NUMBER OF CYCLES AT 60Hz 3.0 1.0 Tj=25 C Pulse Width 300us 1% Duty Cycle 0.1 3.0 1.0 0.1 Tj=25 C .01 0 .2 .4 .6 .8 1.0 FORWARD VOLTAGE,(V) 1.2 1.4 .01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)