DIN 41612 TYPE HALF Q (REVERSED) – MALE 16 and 32 Contacts 2 Rows Class 2 and 3 2.54mm(0.1”), 5.08mm(0.2” Half loaded) Pitch High Reliability UL Approved SPECIFICATION Material SECTION 10 100°C 0.5A Contact resistance: ≤20mΩ (testing current 100mA) ≤40mΩ after 400 mating cycles Capacitance between adjacent contacts: Appr. 2pF Insulation resistance: ≥1012Ω (between adjacent contacts at 100 VDC) Test voltage: 1,000Vrms between contacts (2.54mm spacing) 1,550Vrms between contacts (5.08mm spacing) 1,550Vrms between contacts and body Operating voltage: 250V AC Insulator: Glass filled polyester (PBT, UL flammability 94V-0) Contacts: Female copper alloy, male brass Contact finish: Contact area: Gold over nickel (per requirements of performance class 3, class 2) Termination area: Tin - plated or Gold-plated for long wrap post Mechanical Insertion force: 32 contacts max. 30N 16 contacts max. 15N Withdrawal force per contact: min 0.15N Agency approval U/L Electric rating: Mating Cycles: Temperature range: -55°C to +125°C Air and creepage distance 1.2mm min. 250V, 2A Class 2 = 400 Class 3 = 50 Electrical Current rating: 20°C 2A 70°C 1A OUTLINE DRAWING PCB LAYOUT 4 ORDERING INFORMATION DBC DIN M 16 HQ A S 3 Dubilier Connectors Series Connector Type Nº of Ways Housing Style Position of Contacts A = A row AB = A+B rows AB1=AB even n°. Termination Style Quality Class DIN 41612 M = Male 16 = 16 ways 32 = 32 ways HQ = Half Q S = Straight Solder Tail length options available on request 3 = class 3 2 = class 2 246 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758