AUDIO PCB DIN JACK SOCKETS SECTION 6 4 - 8 way available Unshielded and full shielded available Competitively priced Industry Compatible PCB Mounting SPECIFICATION Contact resistance (DCR 0.1A) 1, InItial, before any testing: 2.After life test with mating plug: Insertion Force: Extraction Force: Soldering Heat: Operating Temperature range: Insulating Resistance: Voltage Test: Lifetime: Rated Voltage: Rated Current: (1) Pin to contact or (NC): 30mΩ (2) Plug shield to socket or (NO):50mΩ (1) Pin to contact or (NC): 60mΩ (2) Plug shield to socket or (N0): 100mΩ 0.5kg - 6.0kg Terminal must withstand a 500g minimum pull for 10 seconds 0.5kg - 6.0kg before movement or break from housing occurs Terminal for PC board temperature: 260 + 5˚C for 5+ 1.0 seconds -25˚C to 100˚C More than 100MΩ by 500v DC at 90-95% RH, 40˚C Withstand 0.5mA 500v AC between any open terminal for one minute Withstand more than 5000 cycle’s insertion and withdrawal with testing plug 16vdc 20mA - 0.3A OUTLINE DRAWING DBCDS0507 DBCDS0507A Unshielded Shielded ORDERING INFORMATION DBC DS Dubilier Connectors Din Socket 0507 Series -4 Nº of Ways 0507 = Unshielded 0507A = Shielded 160 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758