TERMINAL BLOCKS 5MM PITCH 90° SCREW TERMINAL 5mm Pitch 2.5mm2 wire acceptance Screw Terminal UL/CE/VDE approved 2 - 12 pole end stackable SPECIFICATION Electrical Characteristics Rating Current: 17.5A/380V Pin/terminal: 5µ tinned, nickel plated brass Contact Resistance: ≥2.5kV/60sec WIre protector: Tin plated phosphor bronze Insulation Resistance: ≥5MΩ Screw/torque: M3 steel, 6µ zinc colour passivated and tropicalised/5Nm Recommended PCB hole size: ø1.1mm Operating Temperature: -20°C to +125°C Short Period: 160°C Moulding: UL94-V0 flame retardant Lexan ORDERING INFORMATION DBC TB 43 /2 Dubilier Connectors Series Style No of Ways Terminal Blocks 2 = 2ways 3 = 3ways 2.6 10.4 OUTLINE DRAWING 6 * other number of ways are available Please consult the office for further details TERMINAL BLOCKS 5mm PITCH VERTICAL MOUNT 5.00 mm pitch Screw terminal Stamped insert 4.0mm2 wire acceptance Rating 24A/250V UL/VDE/CE approved SPECIFICATION Rating: Dielectric Strength: Insulation Resistance: Working temperature: Short Period: Moulding: Pin/terminal: Wire Protector: Screw/torque: Recommended PCB hole size: 24A/250 Vac >2.5KV >5MΩ -20°C to 125°C 160° UL94V-0 flame retardant nylon 66 ø1.3mm2 ORDERING INFORMATION OUTLINE DRAWING DBC TB 10 /2 Dubilier Connectors Series Style Nº of Ways Terminal Block 2 = 2 ways 3 = 3 ways * Other Number of ways are available up to 24 Please consult office for further details 2.5 375 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758 SECTION 18 2.6 5 micron tinned nickel plated brass Tin plated phosphor bronze M2.5 Zinc Steel / 0.5NM, colour passivated and tropicalised