DATASHEET | JULY 17, 2003 2609B Broadband Photodiode Module The 2609B is a packaged impedance-matched photodiode module with internal gain designed for use in optical broadband receivers in fiberoptic networks. The patented impedance-match technology results in improved gain-bandwidth product compared to external circuits due to better control of parasitics between the photodiode and the impedancematching circuit. Features Flat response to + 0.5 dB Frequency response up to 860 MHz High Responsivity >0.85A/W at 1310 nm >0.95 A/W at 1550 nm PIN Information Table 1. Pin Descriptions Pin No. Description 1 Ground 2 Ground 3 Ground 4 Ground 5 Ground Internal current gain, 6 dB (typ.) 6 Ground 7 Open 75 8 Open 9 RF Out 10 Ground 11 Bias 12 Ground 13 Open 14 Ground impedance-matched Applications Broadband CATV receivers For more information on this and other products: Contact Sales at Ortel 626-293-3400, or visit www.emcore.com. 2609B Broadband Photodiode Module DATASHEET | JULY 17, 2003 Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability. Parameter Symbol Min Max Unit Operating case temperature range TC -40 85 °C Storage temperature range Tstg -40 85 °C Optical Input Power PIN -- 2 mW Bias Voltage VPD -- 20 V IF -- 10 mA Forward Current Characteristics Note: These product specifications describe warranted performance. Typical values provide expected levels of performance but are not guaranteed. Table 2. Electrical/Optical Characteristics Parameter Symbol Min. Typ. Max. Unit 1280 -- 1580 nm -- --- >0.85 at 1310 nm >0.95 at 1550 nm --- mA/mW mA/mW RL -- >45 -- dB Optical Wavelength Range Responsivity 1 Optical Return Loss Bias Voltage -- -- 15 (nominal) -- V Dark Current ID -- 200 at 20 °C -- nA Symbol Min. Typ. Max. Unit 1. Without connector Table 3. RF Characteristics Parameter Frequency Range F 40 -- 860 MHz G -- >5 -- dB Frequency Response -- -- <+ 0.5 -- dB Receiver Noise -- --- dBc dBc Gain 1 See Figure 1. 2 Distortion Products Second Order Third Order CSO CTB --- <-70 <-80 1. Current gain of internal transformer circuit 2. Two laser test. Each laser has 40% modulation index. Total received optical power is 0 dBm. Distortion products measured at 80 MHz, 450 MHz, 600 MHz, and 850 MHz ORTEL, A division of EMCORE 2 of 4 2609B Broadband Photodiode Module DATASHEET | JULY 17, 2003 Characteristics Curves Outline Diagram Dimensions are in inches. ORTEL, A division of EMCORE 3 of 4 2609B Broadband Photodiode Module DATASHEET | JULY 17, 2003 Ordering Information Contact Ortel, a division of EMCORE, for ordering information on this or any other product at (626) 293-3400 Table 2. Ordering Information Device Code Description Connector Pigtail 2609B Broadband Photodiode Module None Singlemode, 9 m/125 m 2 m-3 m Information contained herein is deemed to be reliable and accurate as of issue date. EMCORE reserves the right to change the design or specifications of the product at any time without notice. Ortel, the Ortel logo, EMCORE, and the EMCORE logo are trademarks of EMCORE Corporation. ORTEL, ds. 2609C A division of EMCORE Ortel, a division of EMCORE 2015 West Chestnut Street Alhambra, California 91803-1542 Tel: 626-293-3400 Fax: 626-293-3428 www.emcore.com 4 of 4 Copyright 2003. EMCORE Corporation