Embedded Power for Business-Critical Continuity Rev.7.28.09_40 SIL30E Series of 5 SIL30E Series 12 Vin Single Output Total Power: 99 W Input Voltage: 8 - 14 VDC # of Outputs: Single Special Features • 30 A current rating • Input voltage range: 8 Vdc to 14 Vdc • Output voltage range: 0.8 Vdc to 3.63 Vdc • Ultra high efficiency: 93% @ 12 Vin and 3.3 Vout • Extremely low internal power dissipation • Minimal thermal design concerns • Designed in reliability: MTBF of 9,200,000 hours per Telcordia SR-332 • Ideal solution where board space is at a premium or tighter card pitch is required • Available RoHS compliant • 2 Year Warranty Electrical Specifications Output Voltage adjustability: 0.8 - 3.63 Vdc Setpoint accuracy: ± 1.3% typ Line regulation: ± 0.2% typ Load regulation: ± 1.5% typ Total error band: ± 3.0% typ Minumum load: 0A Overshoot/undershoot: Ripple and noise: None 5 Hz to 20 MHz 50 mV pk-pk 25 mV rms ±0.01%/°C Transient response: Vout = 1.5 V 50% to 75% load step Slew rate: = 0.5 A/µs 3% max deviation 10 µs recovery to within ± 1% 10% Vo compensation Temperature coefficient: Remote sense: Input Input voltage range: Safety • UL/cUL : 60950-1 File No. 186249-A16-UL-1 • TÜV Product Service (EN60950) Certificate No. B 07 07 13890 259 • CB report and certificate to IEC60950 Input current: 8 - 14 Vdc No load (max.) 250 mA Input current (max.): 9.2 A max. @ lo max. and Vout = 3.3 V Input reflected ripple: 220 mA rms Remote ON/OFF: (See Note 1) Start-up time: 20 ms Embedded Power for Business-Critical Continuity Rev.7.28.09_40 SIL30E Series of 5 Electrical Specifications All specifications are typical at 12 Vin and 1.5 Vout, full load at 25 °C unless otherwise stated. Cout = 100 µF EMC Characteristics Electrostatic discharge: Conducted immunity: Radiated immunity: EN61000-4-2, IBC801-2 EN61000-4-6 EN61000-4-3 General Specifications Efficiency: @12 Vin, 3.3 Vout Insulation voltage: Switching frequency: Non-isolated Fixed 1.3 MHz typ Approvals and standards: EN60950-1 UL/cUL60950-1 Material flammability: Dimensions: 93% typ UL94V-0 (L x W x H) 50.84 x 7.80 x 12.70 mm 2.000 x 0.307 x 0.500 inches Pin length: 0.140 in (3.56 mm) Weight: 7.0 g (0.25 oz) MTBF (@40 ºC; 50% stress; ground benign): Telcordia SR-332 9,200,000 hours Operating ambient -40 °C to +85 °C Non-operating -40 °C to +125 °C Environmental Specifications Thermal performance: Protection Short-circuit: Thermal: Continuous Automatic recovery Embedded Power for Business-Critical Continuity Rev.7.28.09_40 SIL30E Series of 5 Ordering Information Output Power (Max.) Input Voltage Output Voltage 99 W 8 - 14 Vdc 0.8 - 3.63 Vdc Part Number System with Options Output Current Min Max Efficiency (typ) 0A 30 A 93% Regulation Line Load ± 0.2% ± 1.5% M������������ odel Numbers (2,3) SIL30E-12W3V3-VJ SIL30E-12W3V3-VJ Product Family SIL = Single In Line Packaging Options J = Pb-free (RoHS 6/6 compliant) (2) Rated Output Current 30 = 30 Amps Mounting Option V = Vertical Performance E = Enhanced Performance Output Voltage 0.8 Vdc to 3.63 Vdc Type of Output W = Wide Input Voltage 12 = 8 Vdc to 14 Vdc Output Voltage Adjustment of the SIL30E-12W3V3 Series The ultra-wide output voltage trim range offers major advantages to users who select the SIL30E-12W3V3. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.8 Vdc to 3.63 Vdc. When the SIL30E-12W3V3 converter leaves the factory the output has been adjusted to the default voltage of 0.8 V. Notes Notes 1 The SIL30E features a ‘Positive Logic’ Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. The following conditions apply for the SIL30E: A The derating curve represents the condition at which internal components are within the Artesyn derating guidelines. B Characteristic data has been developed from actual products tested at 25 °C. This data is considered typical data for the converter. Configuration Remote pin open circuit Remote pin pulled low [Von/off < 0.8 V] Remote pin pulled high [Von/off >2.8 V] Converter Operation Unit is ON Unit is OFF Unit is ON A ‘Negative Logic’ Remote ON/OFF version is also possible with this converter. Please consult the factory for details. 2 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 3 NOTICE: Some models do not support all options. Please contact your local Emerson Network Power representative or use the on-line model number search tool at http://www.PowerConversion.com to find a suitable alternative. Embedded Power for Business-Critical Continuity 40 30 0ms 1ms 2ms 20 10 OUTPUT CURRENT (A) OUTPUT CURRENT (A) Rev.7.28.09_40 SIL30E Series of 5 0 30 0ms 1ms 2ms 20 10 0 0 20 40 60 80 100 0 20 40 60 80 AMBIENT TEMPERATURE (°C) Figure 1 - Derating Curve Vin = 12 V, Output Voltage = 1.5 V (See Note A) Figure 2 - Derating Curve Vin = 12 V, Output Voltage = 1.8 V (See Note A) 40 40 30 0ms 1ms 2ms 20 10 30 0ms 1ms 2ms 20 10 0 0 0 20 40 60 80 0 100 20 40 60 80 100 AMBIENT TEMPERATURE (°C) AMBIENT TEMPERATURE (°C) Figure 3 - Derating Curve Vin = 12 V, Output Voltage = 2.5 V (See Note A) Figure 4 - Derating Curve Vin = 12 V, Output Voltage = 3.3 V (See Note A) 100 EFFICIENCY (%) 100 AMBIENT TEMPERATURE (°C) OUTPUT CURRENT (A) OUTPUT CURRENT (A) 40 Remote sense + 80 Vin Vout = 1V0 Vout = 1V5 Vout = 1V8 Vout = 2V0 Vout = 2V5 Vout = 3V3 60 40 20 Vout SIL30E Remote ON/OFF Trim Cin 47F RTRIM Load Cout 100F (Required) Gnd 0 0 5 10 15 20 25 30 OUTPUT CURRENT (A) Figure 5 - Efficiency vs Load Current Vin = 12 V (See Note B) Figure 6 - Standard Application Embedded Power for Business-Critical Continuity Rev.7.28.09_40 SIL30E Series of 5 Mechanical Drawing Americas SIDE VIEW 0.3070.008 (7.800.20) 0.5000.020 (12.70.50) PCB Europe (UK) FRONT VIEW Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone:+44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 0.140 (3.56) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 20 0.050 (1.27) 0.1000.005 (2.540.127) typ. 0.132 (3.36) 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone:+1 760 930 4600 Facsimile: +1 760 930 0698 0.025 (0.64) x 0.025 (0.64) Connector 19 Places 1.900 (48.26) 2.0000.020 (50.840.50) All dimensions in inches (mm) All tolerance 0.010in (0.25mm) unless otherwise stated Asia (HK) 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone:+852 2176 3333 Facsimile: +852 2176 3888 For global contact, visit: www.PowerConversion.com techsupport.embeddedpower @emerson.com Pin Connections Pin No. Function Pin No. Function 1 Vin 11 Vout 2 Vin 12 Vout 3 Ground 13 Remote ON/OFF 4 Ground 14 Ground 5 Trim 15 Ground 6 Remote Sense+ 16 Ground 7 Ground 17 Ground 8 Ground 18 Vin 9 Vout 19 N/C 10 Vout 20 Vin Figure 7 - Mechanical Drawing and Pinout Table While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Computing Embedded Power Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Surge Protection EmersonNetworkPower.com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2009 Emerson Electric Co.