SSL40C Series S i n g l e O u t p u t E x t e r n a l Pow e r S u p p l y EXTERNAL AC/DC POWER SUPPLIES • • • • • • • 40 W External AC/DC Power Supplies 1 4.65 x 2.40 x 1.08 inch enclosure 40 W continuous external power supply Molded UL94V-0 plastic enclosure Overvoltage and short circuit protection EN55022, FCC conducted and radiated emissions level B UL, CSA, VDE and CE safety approvals Available RoHS compliant The SSL40C series is a 40 W universal input ac-dc external Class II power supply in a 4.65 x 2.40 x 1.08 inch plastic enclosure. The SSL40C represents the next generation of low cost external power supplies, suitable for a host of worldwide low power external power applications. The SSL40C provides up to 40 W under natural convection cooling. Standard features include universal ac input, overvoltage and short circuit protection and meets EN55022 level B for conducted emissions. The SSL40C has several output voltages available ranging from 12 V to 48 V. The series has full international safety approvals and carries the CE mark to provide pre-approved SELV outputs. 2 YEAR WARRANTY SPECIFICATIONS All specifications are typical at nominal input, full load at 25 °C unless otherwise stated OUTPUT SPECIFICATIONS Total regulation GENERAL SPECIFICATIONS Main output Line, load and temperature coefficient ±5.0% Overshoot/undershoot Less than 10 ms Transient response Main output, 70% to 100% full load step ±5.0% of nominal voltage Auto-recovery 140% nominal Overvoltage protection (See Note 5) Short circuit protection 10% Continuous with auto-recovery Minimum output current 0A INPUT SPECIFICATIONS Input voltage range 90-264 Vac 90 Vac 264 Vac EN55022, FCC EN55022, FCC International Safety Standard Approvals geprüfte Sicherhelt 10 ms Efficiency 115 Vac @ full load 80% typ. Isolation voltage Input/output 3000 Vac Switching frequency Fixed 72 kHz, typ. Approvals and standards (See Note 4) EN60950, IEC950, UL1950 CSA C22.2 No. 950 Case material General Electric Lexan, black Flammability rating UL94V-0 Weight MTBF Thermal performance 47-63 Hz 1.0 Arms max. 0.6 Arms max. 200 g (7 oz) MIL-HDBK-217F @ 25 °C >150,000 hours Operating, full load 0 °C to +40 °C Non-operating –10 °C to +85 °C 0 °C to +40 °C ambient, Full load convection cooled Relative humidity EMC CHARACTERISTICS Radiated emissions Conducted emissions 115 Vac @ full load ENVIRONMENTAL SPECIFICATIONS Universal input Input frequency range Input current Hold-up time Level B Level B Altitude 5% to 95% RH Operating Non-operating Vibration (See Note 6) 5-500 Hz Shock per MIL-STD-810E 10,000 feet max. 30,000 feet max. 2.4 G (approx.) 516.4 Part IV VDE0805/EN60950/IEC950 File No. 133084G UL1950 File No. E136005 CSA C22.2 No. 950 File No. LR41062 File Name: ssl40c.pdf Rev (03): 07 Nov 2005 SSL40C Series S i n g l e O u t p u t E x t e r n a l Pow e r S u p p l y EXTERNAL AC/DC POWER SUPPLIES 40 W External AC/DC Power Supplies 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT CURRENTS TOTAL OVP OUTPUT VOLTAGE MIN MAX +12 V 0A 3.00 A 3.6 A 120 mV 11.4-12.6 V +15 V 0A 2.66 A 3.0 A 150 mV +18 V 0A 2.22 A 2.6 A 180 mV +24 V 0A 1.66 A 1.9 A +48 V 0A 0.83 A 1.0 A RIPPLE PEAK MODEL (2) (1) REGULATION (3) (7,8) (MAX) NUMBER 16.8 V SSL40C-7612J 14.25-15.75 V 21 V SSL40C-7615J 17.1-18.9 V 25.2 V SSL40C-7618J 240 mV 22.8-25.2 V 33.6 V SSL40C-7624J 300 mV 45.6-50.4 V 64 V SSL40C-7617J Notes 2 3 4 5 Peak output current lasting less than 3 seconds and non repetitive. During peak loading output voltage may exceed total regulation limits. 20 MHz bandwidth, peak to peak, measured using 0.1 µF ceramic capacitor in parallel with a 10 µF tantalum capacitor at the point of output load. Total regulation is defined as the static output regulation at 25 °C, including initial tolerance, line voltage within stated limits, load currents within stated limits, and output voltages adjusted to their factory settings. To help maintain the power supply safety approvals, the IEC320/C7 input connector cable must be rated minimum 3 A and approved by an applicable safety agency for the intended country of use. National and international variations on mains plugs, adapters and customer preference to lead length prevents Artesyn from supplying an IEC320/C7 (or compatible) input connector cable. The IEC320/C7 input (or compatible) connector cable can be sourced locally, e.g. Newark, Qual Electronics, Radio Shack, etc. or other non affiliated distributors. This feature protects output circuitry from output overvoltage caused by internal PSU failure. 6 7 8 Three orthogonal axes random vibration, 10 minute test for each axis. The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. SINGLE OUTPUT PIN CONNECTIONS 2.5 MM JACK PLUG Inner VA Outer Return SWITCHCRAFT Power Jack, P/N 712A or equiv. INPUT CONNECTOR IEC 320 Two pins 4.646 ±0.02 [118.0 ±0.5] C8 type Rated at 2.5 A, 250 Vac 1.083 +0.024 -0.000 27.5 +0.6 -0.0 Cable Length 36.00 ±0.79 [914.0 ±20] 2.402 ±0.02 [61.0 ±0.5] 1 0.098 [2.50] 2.5 mm Phone Jack All Dimensions in inches [mm] Datasheet © Artesyn Technologies® 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. www.artesyn.com File Name: ssl40c.pdf Rev (03): 07 Nov 2005