SDI VIDEO SPLITTER FS1575 The FS1575 SDI Video Splitter provides a low cost solution to splitting a single serial digital video signal between two destinations where ultimate performance can be reduced. It requires no power and only introduces a modest insertion loss. Input/Output Signal Format SDI (SMPTE 259M-C) o 1 o N of outputs 2 Data Rate 5 – 360 Mb/s Impedance 75 ohms N of inputs Insertion Loss at 5.0 MHz < 4 dB 1 Return Loss - Input (5-360 MHz) > 8 dB Return Loss – Output (5-360 MHz) > 14 dB Temperature Range 0°C to 70°C Aqueous Washable No Package DR00334A 1 Measured with both outputs terminated with minimum cable length. © Faraday Technology. A s part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice Fara339s Page 1 of 2 Oct-05(A) PACKAGE DETAIL All dimensions in millimetres (inches). Gen Tolerance ± 0,05 (0.002) unless otherwise stated. DO NOT SCALE © Faraday Technology Ltd Croft Road Newcastle-U-Lyme ST5 0QZ England Tel (044) 01782 661501 Fax 630101 5,4 (0.212) Max. 11,56 (0.46) Max Third Angle Projection 7,62 (0.3) Pin 5 2,16 (0.08) Nom. 7,62 (0.3) Pin 8 12,07 (0.475) Max. 1,9 (0.07) Nom TOP VIEW Pin 1 Pin 4 2,54 (0.1) Typ. Notes; Pins Matl; Brass CDA 260 Pins Size; 0,46 (0.018) x 0,41 (0.016) Pin Assignments; Pin 1 = Input 3,81 (0.15) Nom. Pin 5 = Output 1 Pin 8 = Output 2 Template: DT00068 Change Note No; Auth: C Snell Date: 15/11/01 Faraday Technology Ltd. Croft Road Industrial Estate, Newcastle, Staffordshire ST5 0QZ. England. Fara339s Date: 16/11/01 Title: Drg No: SDI VIDEO SPLITTER Tel: Fax: Email: Web site: Page 2 of 2 DR00334A + 44 (0)1782 661501 + 44 (0)1782 630101 [email protected] http://www.faradaytech.co.uk Oct-05(A)