SE121-00 4-CHANNEL OVERSAMPLED POST FILTER The SE121-00 is a surface mountable four channel video output filter designed to provide all the filtering and buffering requirements for the Analog Devices ADV7170 and ADV7171 encoders. Use of high performance video operational amplifiers gives minimal differential gain and phase distortion with the capability of driving up to ± 2.5V into 75Ω loads. Other features • 4 independent filtered channels for RGB and Alpha or dual S-video and dual composite. • accurate factory set gain of 0 dB (6 dB optional - order SE121-60) • 75Ω output termination resistors provided • Flat passband response - ADV encoder incorporates sinx/x correction • high input impedance - makes interfacing easy • DC coupling eliminates tilt problems associated with AC coupling • DC offset of encoder output (due to single rail operation) is corrected to bring blanking level near zero • 24-pin surface mount DIL package FILTER SPECIFICATION FOR EACH CHANNEL End of Passband 5.5 MHz Passband shape flat Sampling frequency Amplitude ripple ± 0.1 dB to 5.5 MHz, ± 0.2 dB to 6 MHz Gain 0 dB ± 0.2 dB Group Delay ripple < 10 ns to 5.5 MHz Start of stopband 21 MHz Stopband rejection wrt 100 kHz > 30 dB Input impedance 100 kΩ typical Output impedance 75Ω Supply voltage ± 5V Supply current 25 mA per rail (typical) Aqueous Washable Yes Package DR00134B © Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice FARA089d Page 1 of 2 Feb-00(B) PACKAGE DETAIL Faraday Technology Ltd. Croft Road Industrial Estate, Newcastle, Staffordshire ST5 0QZ. England. FARA089d Tel: Fax: Email: Web site: Page 2 of 2 + 44 (0)1782 661501 + 44 (0)1782 630101 [email protected] http://www.faradaytech.co.uk Feb-00(B)