FERROXCUBE ETD54-3C94

FERROXCUBE
DATA SHEET
ETD54/28/19
ETD cores and accessories
Supersedes data of September 2004
2008 Sep 01
Ferroxcube
ETD cores and accessories
ETD54/28/19
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
VALUE
UNIT
Σ(I/A)
core factor (C1)
0.454
mm−1
Ve
effective volume
35500
mm3
Ie
effective length
127
mm
Ae
effective area
280
mm2
Amin
minimum area
270
mm2
m
mass of core half
≈ 90
g
handbook, halfpage
20.2
0.4
27.6
0.2
54.5 1.3
41.2 1.1
18.9 0.4
18.9
0.4
MGC274
Dimensions in mm.
Fig.1 ETD54/28/19 core half.
Core halves
Clamping force for AL measurements, 50 ±20 N. Gapped cores are available on request.
GRADE
AL
(nH)
AIR GAP
(µm)
µe
TYPE NUMBER
3C90
5000 ±25%
≈ 1810
≈0
ETD54/28/19-3C90
3C94
5000 ±25%
≈ 1810
≈0
ETD54/28/19-3C94
3C95
6120 ±25%
≈ 2210
≈0
ETD54/28/19-3C95
3F3
4600 ±25%
≈ 1660
≈0
ETD54/28/19-3F3
Properties of core sets under power conditions
B (mT) at
GRADE
3C90
CORE LOSS (W) at
H = 250 A/m;
f = 25 kHz;
T = 100 °C
f = 25 kHz;
ˆ = 200 mT;
B
T = 100 °C
f = 100 kHz;
ˆ = 100 mT;
B
T = 100 °C
f = 100 kHz;
ˆ = 200 mT;
B
T = 25 °C
f = 100 kHz;
ˆ = 200 mT;
B
T = 100 °C
f = 400 kHz;
ˆ = 50 mT;
B
T = 100 °C
≥330
≤ 4.3
≤ 4.8
−
−
−
3C94
≥330
−
≤ 3.6
−
≤ 21
−
3C95
≥330
−
−
≤ 22.4
≤ 21.3
−
3F3
≥320
−
≤ 4.5
−
−
≤ 8.5
2008 Sep 01
2
Ferroxcube
ETD cores and accessories
ETD54/28/19
COIL FORMERS
General data 22-pins ETD54/28/19 coil former
ITEM
SPECIFICATION
Coil former material
polybutyleneterephtalate (PBT), glass-reinforced, flame retardant
in accordance with UL 94V-0; UL file number E45329(M)
Pin material
copper-tin alloy (CuSn), tin (Sn) plated
Maximum operating temperature
155 °C, “IEC 60085”, class F
Resistance to soldering heat
“IEC 60068-2-20” , Part 2, Test Tb, method 1B, 350 °C, 3.5 s
Solderability
“IEC 60068-2-20”, Part 2, Test Ta, method 1
5.08
handbook, full pagewidth
61.5 max.
39.5 0
−0.35
61.4 max.
39.3 0
−0.3
36.8 min.
19.8 +0.25
0
3.4 +0.15
0
∅21.9 0
−0.4
46.35
max.
4.5
∅1
5.08
55.88
CBW101
1.6 +0.15
0
45.72
Dimensions in mm.
Fig.2 ETD54/28/19 coil former; 22-pins.
Winding data and area product for 22-pins ETD54/28/19 coil former
NUMBER OF
SECTIONS
WINDING
AREA
(mm2)
MINIMUM
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
1
316
36.8
96
88500
2008 Sep 01
3
TYPE NUMBER
CPH-ETD54-1S-22P
Ferroxcube
ETD cores and accessories
ETD54/28/19
MOUNTING PARTS
General data
ITEM
REMARKS
Mounting clip
FIGURE
material: stainless steel
3
11.7
handbook, halfpage
19.3
6.8
42
CBW594
59.7
min.
0.4
Dimensions in mm.
Fig.3 Mounting clip for ETD54/28/19.
2008 Sep 01
4
TYPE NUMBER
CLI-ETD54
Ferroxcube
ETD cores and accessories
ETD54/28/19
DATA SHEET STATUS DEFINITIONS
DATA SHEET
STATUS
PRODUCT
STATUS
DEFINITIONS
Preliminary
specification
Development
This data sheet contains preliminary data. Ferroxcube reserves the right to
make changes at any time without notice in order to improve design and
supply the best possible product.
Product specification
Production
This data sheet contains final specifications. Ferroxcube reserves the right
to make changes at any time without notice in order to improve design and
supply the best possible product.
DISCLAIMER
Life support applications  These products are not designed for use in life support appliances, devices, or systems
where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers
using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube
for any damages resulting from such application.
PRODUCT STATUS DEFINITIONS
STATUS
INDICATION
DEFINITION
Prototype
These are products that have been made as development samples for the purposes of
technical evaluation only. The data for these types is provisional and is subject to
change.
Design-in
These products are recommended for new designs.
Preferred
These products are recommended for use in current designs and are available via our
sales channels.
Support
These products are not recommended for new designs and may not be available
through all of our sales channels. Customers are advised to check for availability.
2008 Sep 01
5