FERROXCUBE DATA SHEET P11/7 P cores and accessories Supersedes data of September 2004 2008 Sep 01 Ferroxcube P cores and accessories P11/7 CORE SETS 6.8 0.25 Effective core parameters SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1) 0.956 mm−1 Ve effective volume 251 mm3 Ie effective length 15.5 mm Ae effective area 16.2 mm2 Amin minimum area 13.2 mm2 m mass of set ≈ 1.8 g 9 0.4 0 4.7 0 0.2 11.1 0.2 2.2 0.3 O 2.9 O 2.1 0.1 0.3 0.1 4.4 0 6.5 0.2 2 0.1 0.45 max MGC150 M1.4 Dimensions in mm. Fig.1 P11/7 core set. Core sets for filter applications Clamping force for AL measurements, 35 ±10 N. GRADE 3D3 3H3 TYPE NUMBER (WITH NUT) TYPE NUMBER (WITHOUT NUT) µe 16 ±3% ≈ 12 ≈ 2210 P11/7-3D3-E16/N P11/7-3D3-E16 25 ±3% ≈ 19 ≈ 1280 P11/7-3D3-E25/N P11/7-3D3-E25 40 ±3% ≈ 31 ≈ 710 P11/7-3D3-E40/N P11/7-3D3-E40 63 ±3% ≈ 48 ≈ 400 P11/7-3D3-E63/N P11/7-3D3-E63 100 ±3% ≈ 76 ≈ 220 P11/7-3D3-A100/N P11/7-3D3-A100 800 ±25% ≈ 610 ≈0 − P11/7-3D3 160 ±3% ≈ 122 ≈ 140 P11/7-3H3-A160/N P11/7-3H3-A160 250 ±3% ≈ 190 ≈ 80 P11/7-3H3-A250/N P11/7-3H3-A250 ≈ 1260 ≈0 − P11/7-3H3 1650 ±25% 2008 Sep 01 TOTAL AIR GAP (µm) AL (nH) 935 Ferroxcube P cores and accessories P11/7 Core sets for general purpose transformers and power applications Clamping force for AL measurements, 35 ±10 N. GRADE 3C81 3C91 3F3 AL (nH) µe AIR GAP (µm) TYPE NUMBER 100 ±3% ≈ 76 ≈ 240 P11/7-3C81-A100 160 ±3% ≈ 122 ≈ 140 P11/7-3C81-A160 250 ±3% ≈ 190 ≈ 85 P11/7-3C81-A250 2050 ±25% ≈ 1560 ≈0 2050 ±25% P11/7-3C81 ≈ 1560 ≈0 100 ±3% ≈ 76 ≈ 240 P11/7-3F3-A100 160 ±3% ≈ 122 ≈ 140 P11/7-3F3-A160 250 ±5% ≈ 190 ≈ 80 P11/7-3F3-A250 ≈ 1260 ≈0 1650 ±25% P11/7-3C91 P11/7-3F3 Core sets of high permeability grades Clamping force for AL measurements, 35 ±10 N. GRADE 3E27 AL (nH) µe AIR GAP (µm) 3400 ±25% ≈ 2600 ≈0 TYPE NUMBER P11/7-3E27 Properties of core sets under power conditions B (mT) at CORE LOSS (W) at H = 250 A/m; f = 25 kHz; T = 100 °C f = 25 kHz; ˆ = 200 mT; B T = 100 °C 3C81 ≥320 ≤ 0.05 3C91 ≥315 − 3F3 ≥315 − ≤ 0.03 GRADE f = 100 kHz; ˆ = 100 mT; B T = 100 °C f = 100 kHz; ˆ = 200 mT; B T = 100 °C f = 400 kHz; ˆ = 50 mT; B T = 100 °C − − − ≤ 0.015(1) ≤ 0.12 (1) − − ≤ 0.05 Note 1. Measured at 60 °C. 2008 Sep 01 936 Ferroxcube P cores and accessories P11/7 INDUCTANCE ADJUSTERS General data handbook, halfpage PARAMETER O 2.13 SPECIFICATION Material of head and thread polypropylene (PP), glass fibre reinforced Maximum operating temperature 125 °C 0.07 0 6.2 2.55 M 1.4 1.5 min 0.5 MGC151 Dimensions in mm. Fig.2 P11/7 inductance adjuster. Inductance adjuster selection chart GRADE 3H3 3D3 AL (nH) TYPES FOR LOW ADJUSTMENT 100 − (applies to all types) ∆L/L(1) − TYPES FOR MEDIUM ∆L/L(1) ADJUSTMENT ADJ-P9/P11-YELLOW ∆L/L(1) ADJ-P9/P11-BROWN 24 22 160 ADJ-P9/P11-YELLOW 8 ADJ-P9/P11-BROWN 15 ADJ-P9/P11-GREY 250 ADJ-P9/P11-BROWN 9 ADJ-P9/P11-GREY 14 − − 16 − − ADJ-P9/P11-YELLOW 19 − − 25 − − − − ADJ-P9/P11-YELLOW 30 40 − − − − ADJ-P9/P11-YELLOW 24 63 − − ADJ-P9/P11-YELLOW 18 − − 100 − − ADJ-P9/P11-YELLOW 11 − − Note 1. Maximum adjustment range. 2008 Sep 01 13 TYPES FOR HIGH ADJUSTMENT 937 Ferroxcube P cores and accessories P11/7 COIL FORMERS General data CP-P11/7-1S coil former PARAMETER SPECIFICATION Coil former material polybutyleneterephtalate (PBT), glass reinforced, flame retardant in accordance with “UL 94V-0” ; UL file number E45329 (R) Maximum operating temperature 155 °C, “IEC 60085”, class F 0 4.2 −0.1 dbook, full pagewidth 0.3 0 5.7 −0.1 1.8 0 8.9 −0.1 CBW599 4.8 +0.1 0 0.4 Dimensions in mm. Fig.3 Coil former: CP-P11/7-1S. Winding data and area product for CP-P11/7-1S coil former NUMBER OF SECTIONS WINDING AREA (mm2) MINIMUM WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) AREA PRODUCT Ae x Aw (mm4) 1 4.8 3.1 22.6 77.8 2008 Sep 01 938 TYPE NUMBER CP-P11/7-1S Ferroxcube P cores and accessories P11/7 General data for CP-P11/7-A coil former PARAMETER SPECIFICATION Coil former material acetal (POM), glass reinforced, flame retardant in accordance with “UL 94-HB”; UL file number E66288(R) Maximum operating temperature 105 °C 4.8 min handbook, full pagewidth 4.2 max 8.9 5.65 max 1.6 min MGB528 Dimensions in mm. Fig.4 Coil former: CP-P11/7-A. Winding data and area product for CP-P11/7-A coil former NUMBER OF SECTIONS MINIMUM WINDING AREA (mm2) NOMINAL WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) AREA PRODUCT Ae x Aw (mm4) 1 4.77 3.42 22.7 77.3 CP-P11/7-1S-A 2 2 × 2.00 2 × 1.52 22.7 2 x 32.4 CP-P11/7-2S-A 3 3 × 1.16 3 × 0.91 22.7 3 x 18.8 CP-P11/7-3S-A 2008 Sep 01 939 TYPE NUMBER Ferroxcube P cores and accessories P11/7 MOUNTING PARTS General data ITEM REMARKS Tag plate FIGURE material: phenolformaldehyde (PF), glass reinforced TYPE NUMBER 5 TGP-P11/7-C 6 CON-P11/7 7 SPR-P11/7 7 CLM/TP-P11/7 flame retardant: in accordance with “UL 94V-0” ; file number E41429 maximum operating temperature: 180 °C, “IEC 60085”, class H pins : copper-tin alloy (CuSn), tin (Sn) plated resistance to soldering heat in accordance with “IEC 60068-2-20” , Part 2, Test Tb, method 1B: 350 °C, 3.5 s solderability in accordance with “IEC 60068-2-20”, Part 2, Test Ta, method 1: 235 °C, 2 s Container copper-zinc alloy (CuZn), tin (Sn) plated earth pins: presoldered Spring CrNi-steel Clamp spring steel, tin-plated spring force: ≈35 N when mounted 12.4 max 10.16 2.54 6.9 10.16 2.5 2.4 4 O 2.4 O 0.8 1.2 0.8 1.35 3.1 Dimensions in mm. Fig.5 P11/7 tag plate. 2008 Sep 01 940 1 0.15 0 MGC153 Ferroxcube P cores and accessories 5.5 andbook, full pagewidth 2 P11/7 3.4 3 2.2 mark 12.45 max. 10 min. 7.5 max. 12.45 max. Dimensions in mm. Fig.6 Container: CON-P11/7. handbook, halfpage 1 0.2 0 10.8 max MGC155 Dimensions in mm. Fig.7 Spring: SPR-P11/7. 2008 Sep 01 941 CBW600 Ferroxcube P cores and accessories P11/7 7 ± 0.25 4 ± 0.25 handbook, halfpage 9.2 ± 0.25 12.2 ± 0.25 7.5 ± 0.25 5 ± 0.5 0.25 12.5 ± 0.25 1.5 ± 0.25 MGB607 Dimensions in mm. Fig.7 Clamp: CLM/TP-P11/7. 2008 Sep 01 942 Ferroxcube P cores and accessories P11/7 DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS PRODUCT STATUS DEFINITIONS Preliminary specification Development This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. DISCLAIMER Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS INDICATION DEFINITION Prototype These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. Design-in These products are recommended for new designs. Preferred These products are recommended for use in current designs and are available via our sales channels. Support These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability. 2008 Sep 01 943