FERROXCUBE DATA SHEET P22/13/I P cores and accessories Supersedes data of September 2004 2008 Sep 01 Ferroxcube P cores and accessories P22/13/I CORE SETS Effective core parameters SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1) 0.450 mm−1 Ve effective volume 2460 mm3 Ie effective length 33.3 mm Ae effective area 73.4 mm2 Amin minimum area 58.1 mm2 m mass of set ≈ 13 g 15 ± 0.4 handbook, halfpage 9.4 18.2 22 ± 0.3 3.8 0 0.3 ± 0.6 0 0.8 0.6 ± 0.13 9.2 13.4 +0.4/−0 ± 0.2 MGB576 Dimensions in mm. Fig.1 P22/13/I core set. Core sets for general purpose transformers and power applications Clamping force for AL measurements, 40 ±10 N. GRADE 3C81 3C91 3F3 2008 Sep 01 AL (nH) AIR GAP (µm) µe 250 ±3% ≈ 90 TYPE NUMBER ≈ 420 P22/13/I-3C81-A250 315 ±3% ≈ 114 ≈ 320 P22/13/I-3C81-A315 400 ±3% ≈ 144 ≈ 250 P22/13/I-3C81-A400 630 ±3% ≈ 227 ≈ 145 P22/13/I-3C81-A630 P22/13/I-3C81-A1000 1000 ±5% ≈ 361 ≈ 85 5330 ±25% ≈ 1920 ≈0 P22/13/I-3C81 5330 ±25% ≈ 1920 ≈0 P22/13/I-3C91 250 ±3% ≈ 90 ≈ 420 P22/13/I-3F3-A250 315 ±3% ≈ 114 ≈ 320 P22/13/I-3F3-A315 400 ±3% ≈ 144 ≈ 250 P22/13/I-3F3-A400 630 ±3% ≈ 227 ≈ 145 P22/13/I-3F3-A630 1000 ±5% ≈ 361 ≈ 85 P22/13/I-3F3-A1000 4070 ±25% ≈ 1470 ≈0 990 P22/13/I-3F3 Ferroxcube P cores and accessories P22/13/I Properties of core sets under power conditions B (mT) at CORE LOSS (W) at H = 250 A/m; f = 25 kHz; T = 100 °C f = 25 kHz; ˆ = 200 mT; B T = 100 °C f = 100 kHz; ˆ = 100 mT; B T = 100 °C f = 100 kHz; ˆ = 200 mT; B T = 100 °C f = 400 kHz; ˆ = 50 mT; B T = 100 °C 3C81 ≥320 ≤ 0.57 − − − 3C91 ≥315 − 3F3 ≥315 − GRADE ≤ ≤ 0.13(1) ≤ 0.27 − 0.92 (1) − ≤ 0.47 Note 1. Measured at 60 °C. BOBBINS AND ACCESSORIES Coil formers, winding data and mounting parts are equal to those of “P22/13”, but “area product” is different. Winding data and area product (for P22/13/I) for CP-P22/13 coil former NUMBER OF SECTIONS MINIMUM WINDING AREA (mm2) NOMINAL WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) AREA PRODUCT Ae x Aw (mm4) 1 26.2 7.5 44.5 1920 2 2 × 12.2 2 × 3.45 44.5 2 x 895 CP-P22/13-2S 3 3 × 7.6 3 × 2.1 44.5 3 x 558 CP-P22/13-3S TYPE NUMBER CP-P22/13-1S Winding data and area product (for P22/13/I) for 6-pins P22/13 coil former for PCB mounting NUMBER OF SECTIONS MINIMUM WINDING AREA (mm2) NOMINAL WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) MINIMUM LENGTH OF PINS (mm) AREA PRODUCT Ae x Aw (mm4) 1 25.2 7.8 44.5 4.4 1850 CPV-P22/13-1S-6PD 1 25.2 7.8 44.5 6.8 1850 CPV-P22/13-1S-6PDL 2 2 × 11.7 2 × 3.6 44.5 4.4 2 x 859 CPV-P22/13-2S-6PD 2 2 × 11.7 2 × 3.6 44.5 6.8 2 x 859 CPV-P22/13-2S-6PDL 3 3 × 7.03 3 × 2.2 44.5 4.4 3 x 516 CPV-P22/13-3S-6PD(1) 3 3 × 7.03 3 × 2.2 44.5 6.8 3 x 516 CPV-P22/13-3S-6PDL (1) Note 1. In accordance with “UL 94-HB” . 2008 Sep 01 991 TYPE NUMBER Ferroxcube P cores and accessories P22/13/I DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS PRODUCT STATUS DEFINITIONS Preliminary specification Development This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. DISCLAIMER Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS INDICATION DEFINITION Prototype These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. Design-in These products are recommended for new designs. Preferred These products are recommended for use in current designs and are available via our sales channels. Support These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability. 2008 Sep 01 992