N ew !!! SMD wideband choke with extra metallization Excellent performance FERROXCUBE now offers the extensively used SMD wideband choke with an extra Cu/Sn based metallization layer. The present SMD metallized design preserves the excellent properties and improves the reliability of the original SMD wideband choke. Features • Outperforming ferrite material • Large soldering area, still side by side mounting possible • Very thin metallization • Reflow soldering with SnAgCu solderpaste strip material copper (Cu), tin-lead (SnPb) plated, lead-free (Sn) plated available metallization copper-tin (CuSn) Solderability IEC 60068-2-58, part 2, test Ta, method 1 Mass ≈ 0.9 g Taping method IEC 60286-3 and EIA 481-2 • Ready for SMD automatic mounting • Higher robustness than traditional metallization • Able to stand the toughest life and mechanical on-board tests (automotive) Pb |Ztyp|(1) (Ω) at f (MHz) 485 25 850 100 350 300 (1) Typical values, |Z|min is −20 % Impedance curve Mechanical dimensions 1000 ≤ 11 Z (Ω) 8.5 ± 0.25 ≥2 ≥2 ≥2 800 ≥ 2.5 600 400 5 ± 0.25 4.6 ± 0.2 200 0 1 102 10 f (MHz) 103 WBSM2.5-5/4.8/10-4B1 A Y A G E O C O M P A N Y