FRONTIER 2436

Frontier Electronics Corp.
667 E. COCHRAN STREET, SIMI VALLEY, CA 93065
TEL: (805) 522-9998
FAX: (805) 522-9989
E-mail: [email protected]
Web: frontierusa.com
Insert Molded Coil—2436 series
A. Mechanical Drawing:
B. Electrical Specification:
Part No.
2436-01
2436-02
2436-03
2436-04
2436-05
2436-06
2436-07
L Min. (uH)
0.0380
0.0510
0.0710
0.0860
0.1070
0.1250
0.1500
L Nom. (uH)
0.0390
0.0540
0.0760
0.0950
0.1150
0.1340
0.1560
L Max. (uH)
0.0395
0.0560
0.0810
0.1040
0.1230
0.1430
0.1620
Q Min. @ L Nom.
65 @ 50 MHz
70 @ 50 MHz
77 @ 50 MHz
80 @ 50 MHz
78 @ 50 MHz
80 @ 50 MHz
80 @ 50 MHz
Color
Brown
Red
Orange
Yellow
Green
Blue
Violet
C. Features:
1. Plastic molded.
2. High reliability.
3. Low cost.
D. Measurement:
1. Q and L measured with ½” long of TCW#16 soldered along the coil leads and with one end flush with the
bottom of the coil then bent ¼” down from stand off at an angle of 90°.
2. L min. measured with core halfway out of the top of the form.
3. Inductance greater than 0.1uH read at recommended Q meter frequency.
4. Inductance below 0.1uH calculated from readings taken at 50MHz.
E. Test equipment:
Q meter (HP 4342A)
IMC 2436 series
Mar. 15, 2002 Page 1 of 1