µA79M00 SERIES NEGATIVE-VOLTAGE REGULATORS SLVS060E – JUNE 1976 – REVISED APRIL 2000 D D D D D D D KC PACKAGE (TOP VIEW) 3-Terminal Regulators Output Current up to 500 mA No External Components High Power-Dissipation Capability Internal Short-Circuit Current Limiting Output Transistor Safe-Area Compensation Direct Replacements for Fairchild µA79M00 Series OUTPUT INPUT COMMON The INPUT terminal is in electrical contact with the mounting base. TO-220AB OUTPUT INPUT COMMON description This series of fixed-negative-voltage monolithic integrated-circuit voltage regulators is designed to complement the µA78M00 series in a wide range of applications. These applications include on-card regulation for elimination of noise and distribution problems associated with single-point regulation. Each of these regulators delivers up to 500 mA of output current. The internal current-limiting and thermal-shutdown features of these regulators make them essentially immune to overload. In addition to use as fixed-voltage regulators, these devices can be used with external components to obtain adjustable output voltages and currents, and also as the power-pass element in precision regulators. KTP PACKAGE (TOP VIEW) OUTPUT INPUT COMMON The INPUT terminal is in electrical contact with the mounting base. OUTPUT INPUT COMMON The µA79M00C series is characterized for operation over the virtual junction temperature range of 0°C to 125°C. AVAILABLE OPTIONS PACKAGED DEVICES TJ 0°C to 125°C CHIP FORM (Y) VO(NOM) (V) HEAT-SINK MOUNTED (KC) PLASTIC FLANGE MOUNTED (KTP) –5 µA79M05CKC µA79M05CKTP µA79M05Y –6 — µA79M06CKTP µA79M06Y –8 — µA79M08CKTP µA79M08Y –12 — µA79M12CKTP µA79M12Y –15 — µA79M15CKTP µA79M15Y –20 — µA79M20CKTP µA79M20Y –24 — µA79M24CKTP µA79M24Y The KTP package also is available in tape and reel. Add the suffix R to device type (e.g., µA79M05CKTPR). Chip forms are tested at 25°C. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2000, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 µA79M00 SERIES NEGATIVE-VOLTAGE REGULATORS SLVS060E – JUNE 1976 – REVISED APRIL 2000 schematic COMMON 4.5 kΩ to 6.3 kΩ 1.7 kΩ to 18 kΩ OUTPUT 0.1 Ω 0.2 Ω INPUT Resistor values shown are nominal. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 µA79M00 SERIES NEGATIVE-VOLTAGE REGULATORS SLVS060E – JUNE 1976 – REVISED APRIL 2000 absolute maximum ratings over operating temperature range (unless otherwise noted)† µA79MxxC Input voltage Package thermal impedance, impedance θJA (see Notes 1 and 2) µA79M20C, µA79M24C –40 All others –35 KC package 22 KTP package 28 V °C/W 0 to 150 °C 260 °C –65 to 150 °C Operating free-air, TA; case, TC; or virtual junction, TJ, temperature range Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds Storage temperature range, Tstg UNIT † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability. Due to variations in individual device electrical characteristics and thermal resistance, the built-in thermal-overload protection may be activated at power levels slightly above or below the rated dissipation. 2. The package thermal impedance is calculated in accordance with JESD 51. recommended operating conditions Input voltage, VI MIN MAX µA79M05C –7 –25 µA79M06C –8 –25 µA79M08C –10.5 –25 µA79M12C –14.5 30 µA79M15C –17.5 –30 µA79M20C –23 –35 µA79M24C –27 –38 Output current, IO Operating virtual junction temperature, TJ 0 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 UNIT V 500 mA 125 °C 3 µA79M00 SERIES NEGATIVE-VOLTAGE REGULATORS SLVS060E – JUNE 1976 – REVISED APRIL 2000 electrical characteristics at specified virtual junction temperature, VI = –10 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) µA79M05C TEST CONDITIONS† PARAMETER Output voltage VI = –7 7 V to –25 25 V V, Input voltage regulation VI = –7 V to –25 V VI = –8 V to –18 V Ripple rejection VI = –8 V to –18 V,, f = 120 Hz Output voltage regulation IO = 5 mA to 500 mA IO = 5 mA to 350 mA Temperature coefficient of output voltage IO = 5 mA, Output noise voltage f = 10 Hz to 100 kHz IO = 5 mA to 350 mA IO = 100 mA, IO = 300 mA TJ = 0°C to 125°C TJ = 0°C to 125°C MIN TYP –4.8 –5 –4.75 MAX –5.2 –5.25 7 50 3 30 50 54 100 50 TJ = 0°C to 125°C Dropout voltage VI = –8 V to –18 V, IO = 5 mA to 350 mA, Short-circuit output current VI = –30 V mV mV/°C 125 µV 1 Bias current change mV –0.4 1.1 Bias current V dB 60 75 UNIT TJ = 0°C to 125°C TJ = 0°C to 125°C V 2 0.4 0.4 140 mA mA mA Peak output current 0.65 A † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 2-µF capacitor across the input and a 1-µF capacitor across the output. electrical characteristics at specified virtual junction temperature, VI = –11 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) µA79M06C TEST CONDITIONS† PARAMETER Output voltage VI = –8 8 V to –25 25 V V, Input voltage regulation VI = –8 V to –25 V VI = –9 V to –19 V Ripple rejection VI = –9 V to –19 V,, f = 120 Hz Output voltage regulation IO = 5 mA to 500 mA IO = 5 mA to 350 mA Temperature coefficient of output voltage IO = 5 mA, Output noise voltage f = 10 Hz to 100 kHz IO = 5 mA to 350 mA IO = 100 mA, IO = 300 mA TJ = 0°C to 125°C TJ = 0°C to 125°C MIN TYP MAX –5.75 –6 –6.25 –5.7 –6.3 7 60 3 40 50 54 120 55 TJ = 0°C to 125°C Dropout voltage VI = –9 V to –25 V, IO = 5 mA to 350 mA, Short-circuit output current VI = –30 V mV mV/°C 150 µV 1 Bias current change mV –0.4 1.1 Bias current V dB 60 80 UNIT TJ = 0°C to 125°C TJ = 0°C to 125°C V 2 0.4 0.4 140 mA mA mA Peak output current 0.65 A † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 2-µF capacitor across the input and a 1-µF capacitor across the output. 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 µA79M00 SERIES NEGATIVE-VOLTAGE REGULATORS SLVS060E – JUNE 1976 – REVISED APRIL 2000 electrical characteristics at specified virtual junction temperature, VI = –19 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) µA79M08C TEST CONDITIONS† PARAMETER Output voltage VI = –10.5 10 5 V to –25 25 V V, Input voltage regulation VI = –10.5 V to –25 V VI = –11 V to –21 V Ripple rejection VI = –11.5 V to –21.5 V,, f = 120 Hz Output voltage regulation IO = 5 mA to 500 mA IO = 5 mA to 350 mA Temperature coefficient of output voltage IO = 5 mA, Output noise voltage Dropout voltage IO = 5 mA to 350 mA IO = 100 mA, IO = 300 mA TJ = 0°C to 125°C TJ = 0°C to 125°C MIN TYP MAX –7.7 –8 –8.3 –7.6 –8.4 8 80 4 50 50 54 160 60 TJ = 0°C to 125°C V mV dB 59 90 UNIT mV –0.6 mV/°C f = 10 Hz to 100 kHz 200 µV IO = 5 mA 1.1 Bias current 1 Bias current change VI = –10.5 V to –25 V, IO = 5 mA to 350 mA, Short-circuit output current VI = –30 V TJ = 0°C to 125°C TJ = 0°C to 125°C V 2 0.4 0.4 140 mA mA mA Peak output current 0.65 A † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 2-µF capacitor across the input and a 1-µF capacitor across the output. electrical characteristics at specified virtual junction temperature, VI = –19 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) µA79M12C TEST CONDITIONS† PARAMETER Output voltage VI = –14.5 14 5 V to –30 30 V V, Input voltage regulation VI = –14.5 V to –30 V VI = –15 V to –25 V Ripple rejection VI = –15V to –25 V,, f = 120 Hz Output voltage regulation IO = 5 mA to 500 mA IO = 5 mA to 350 mA Temperature coefficient of output voltage IO = 5 mA, Output noise voltage f = 10 Hz to 100 kHz IO = 5 mA to 350 mA IO = 100 mA, IO = 300 mA TJ = 0°C to 125°C TJ = 0°C to 125°C MIN TYP MAX –11.5 –12 –12.5 –11.4 –12.6 9 80 5 50 50 54 300 µV 1.1 1.5 Short-circuit output current VI = –30 V mV mV/°C Bias current VI = –14.5 V to –30 V, IO = 5 mA to 350 mA, mV –0.8 Dropout voltage Bias current change 240 45 TJ = 0°C to 125°C V dB 60 65 UNIT TJ = 0°C to 125°C TJ = 0°C to 125°C V 3 0.4 0.4 140 mA mA mA Peak output current 0.65 A † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 2-µF capacitor across the input and a 1-µF capacitor across the output. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5 µA79M00 SERIES NEGATIVE-VOLTAGE REGULATORS SLVS060E – JUNE 1976 – REVISED APRIL 2000 electrical characteristics at specified virtual junction temperature, VI = –23 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) µA79M15C TEST CONDITIONS† PARAMETER Output voltage VI = –17.5 17 5 V to –30 30 V V, Input voltage regulation VI = –17.5 V to –30 V VI = –18 V to –28 V Ripple rejection VI = –18.5 V to –28.5 V,, f = 120 Hz Output voltage regulation IO = 5 mA to 500 mA IO = 5 mA to 350 mA Temperature coefficient of output voltage IO = 5 mA, Output noise voltage Dropout voltage IO = 5 mA to 350 mA IO = 100 mA, IO = 300 mA TJ = 0°C to 125°C TJ = 0°C to 125°C MIN TYP –14.4 –15 –14.25 MAX –15.6 –15.75 9 80 7 50 50 54 240 45 TJ = 0°C to 125°C V mV dB 59 65 UNIT mV –1 mV/°C f = 10 Hz to 100 kHz 375 µV IO = 5 mA 1.1 Bias current 1.5 Bias current change VI = –17.5 V to –30 V, IO = 5 mA to 350 mA, Short-circuit output current VI = –30 V TJ = 0°C to 125°C TJ = 0°C to 125°C V 3 0.4 0.4 140 mA mA mA Peak output current 0.65 A † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 2-µF capacitor across the input and a 1-µF capacitor across the output. electrical characteristics at specified virtual junction temperature, VI = –29 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) µA79M20C TEST CONDITIONS† PARAMETER Output voltage VI = –23 23 V to –35 35 V, V Input voltage regulation VI = –23 V to –35 V VI = –24 V to –34 V Ripple rejection VI = –24 V to –34 V,, f = 120 Hz Output voltage regulation IO = 5 mA to 500 mA IO = 5 mA to 350 mA Temperature coefficient of output voltage IO = 5 mA, Output noise voltage f = 10 Hz to 100 kHz IO = 5 mA to 350 mA IO = 100 mA, IO = 300 mA TJ = 0°C to 125°C TJ = 0°C to 125°C MIN TYP MAX –19.2 –20 –20.8 –19 –21 12 80 10 70 50 54 500 µV 1.1 1.5 Short-circuit output current VI = –30 V mV mV/°C Bias current VI = –23 V to –35 V, IO = 5 mA to 350 mA, mV –1 Dropout voltage Bias current change 300 50 TJ = 0°C to 125°C V dB 58 75 UNIT TJ = 0°C to 125°C TJ = 0°C to 125°C V 3.5 0.4 0.4 140 mA mA mA Peak output current 0.65 A † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 2-µF capacitor across the input and a 1-µF capacitor across the output. 6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 µA79M00 SERIES NEGATIVE-VOLTAGE REGULATORS SLVS060E – JUNE 1976 – REVISED APRIL 2000 electrical characteristics at specified virtual junction temperature, VI = –33 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) µA79M24C TEST CONDITIONS† PARAMETER Output voltage VI = –27 27 V to –38 38 V, V Input voltage regulation VI = –27 V to –38 V VI = –28 V to –38 V Ripple rejection VI = –28 V to –38 V,, f = 120 Hz Output voltage regulation IO = 5 mA to 500 mA IO = 5 mA to 350 mA Temperature coefficient of output voltage IO = 5 mA, Output noise voltage f = 10 Hz to 100 kHz IO = 5 mA to 350 mA IO = 100 mA, IO = 300 mA TJ = 0°C to 125°C TJ = 0°C to 125°C MIN TYP –23 –24 –22.8 12 80 12 70 54 75 V mV mV –1 mV/°C 600 µV 1.1 1.5 VI = –30 V 300 50 Bias current Short-circuit output current UNIT dB 58 Dropout voltage VI = –27 V to –38 V, IO = 5 mA to 350 mA, –25 –25.2 50 TJ = 0°C to 125°C Bias current change MAX TJ = 0°C to 125°C TJ = 0°C to 125°C V 3.5 0.4 0.4 140 mA mA mA Peak output current 0.65 A † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 2-µF capacitor across the input and a 1-µF capacitor across the output. electrical characteristics at specified virtual junction temperature, VI = –10 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) µA79M05Y TEST CONDITIONS† PARAMETER MIN Output voltage Input voltage regulation Ripple rejection Output voltage regulation TYP –5 VI = –7 V to –25 V VI = –8 V to –18 V VI = –8 V to –18 V, IO = 5 mA to 500 mA 7 3 IO = 300 mA, f = 120 Hz 60 75 50 MAX UNIT V mV dB mV Temperature coefficient of output voltage IO = 5 mA to 350 mA IO = 5 mA –0.4 mV/°C Output noise voltage f = 10 Hz to 100 kHz 125 µV 1.1 V Dropout voltage Bias current Short-circuit output current VI = –30 V 1 mA 140 mA Peak output current 0.65 A † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 2-µF capacitor across the input and a 1-µF capacitor across the output. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 7 µA79M00 SERIES NEGATIVE-VOLTAGE REGULATORS SLVS060E – JUNE 1976 – REVISED APRIL 2000 electrical characteristics at specified virtual junction temperature, VI = –11 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) µA79M06Y TEST CONDITIONS† PARAMETER MIN Output voltage Input voltage regulation Ripple rejection Output voltage regulation TYP MAX –6 VI = –8 V to –25 V VI = –9 V to –19 V VI = –9 V to –19 V, IO = 5 mA to 500 mA V 7 mV 3 IO = 300 mA, f = 120 Hz UNIT 60 dB 80 mV Temperature coefficient of output voltage IO = 5 mA to 350 mA IO = 5 mA 55 –0.4 mV/°C Output noise voltage f = 10 Hz to 100 kHz 150 µV Dropout voltage 1.1 Bias current Short-circuit output current VI = –30 V V 1 mA 140 mA Peak output current 0.65 A † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 2-µF capacitor across the input and a 1-µF capacitor across the output. electrical characteristics at specified virtual junction temperature, VI = –19 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) µA79M08Y TEST CONDITIONS† PARAMETER MIN Output voltage Input voltage regulation Ripple rejection Output voltage regulation TYP –8 VI = –10.5 V to –25 V VI = –11 V to –21 V 8 4 VI = –11.5 V to –21.5 V, IO = 5 mA to 500 mA IO = 300 mA, f = 120 Hz 59 90 60 MAX UNIT V mV dB mV Temperature coefficient of output voltage IO = 5 mA to 350 mA IO = 5 mA –0.6 mV/°C Output noise voltage f = 10 Hz to 100 kHz 200 µV Dropout voltage IO = 5 mA 1.1 V 1 mA VI = –30 V 140 mA Bias current Short-circuit output current Peak output current A † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 2-µF capacitor across the input and a 1-µF capacitor across the output. 8 0.65 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 µA79M00 SERIES NEGATIVE-VOLTAGE REGULATORS SLVS060E – JUNE 1976 – REVISED APRIL 2000 electrical characteristics at specified virtual junction temperature, VI = –19 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) µA79M12Y TEST CONDITIONS† PARAMETER MIN Output voltage Input voltage regulation Ripple rejection Output voltage regulation TYP MAX –12 VI = –14.5 V to –30 V VI = –15 V to –25 V VI = –15 V to –25 V, IO = 5 mA to 500 mA V 9 mV 5 IO = 300 mA, f = 120 Hz UNIT 60 dB 65 mV Temperature coefficient of output voltage IO = 5 mA to 350 mA IO = 5 mA 45 –0.8 mV/°C Output noise voltage f = 10 Hz to 100 kHz 300 µV Dropout voltage 1.1 V Bias current 1.5 mA 140 mA Short-circuit output current VI = –30 V Peak output current 0.65 A † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 2-µF capacitor across the input and a 1-µF capacitor across the output. electrical characteristics at specified virtual junction temperature, VI = –23 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) µA79M15Y TEST CONDITIONS† PARAMETER MIN Output voltage Input voltage regulation Ripple rejection Output voltage regulation TYP –15 VI = –17.5 V to –30 V VI = –18 V to –28 V 9 7 VI = –18.5 V to –28.5 V, IO = 5 mA to 500 mA IO = 300 mA, f = 120 Hz 59 65 MAX UNIT V mV dB mV 45 Temperature coefficient of output voltage IO = 5 mA to 350 mA IO = 5 mA –1 mV/°C Output noise voltage f = 10 Hz to 100 kHz 375 µV Dropout voltage IO = 5 mA 1.1 V 1.5 mA VI = –30 V 140 mA Bias current Short-circuit output current Peak output current 0.65 A † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 2-µF capacitor across the input and a 1-µF capacitor across the output. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 9 µA79M00 SERIES NEGATIVE-VOLTAGE REGULATORS SLVS060E – JUNE 1976 – REVISED APRIL 2000 electrical characteristics at specified virtual junction temperature, VI = –29 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) µA79M20Y TEST CONDITIONS† PARAMETER MIN Output voltage Input voltage regulation Ripple rejection Output voltage regulation TYP MAX –20 VI = –23 V to –35 V VI = –24 V to –34 V VI = –24 V to –34 V, IO = 5 mA to 500 mA V 12 mV 10 IO = 300 mA, f = 120 Hz UNIT 58 dB 75 mV 50 Temperature coefficient of output voltage IO = 5 mA to 350 mA IO = 5 mA –1 mV/°C Output noise voltage f = 10 Hz to 100 kHz 500 µV Dropout voltage 1.1 V Bias current 1.5 mA 140 mA Short-circuit output current VI = –30 V Peak output current 0.65 A † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 2-µF capacitor across the input and a 1-µF capacitor across the output. electrical characteristics at specified virtual junction temperature, VI = –33 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) µA79M24Y TEST CONDITIONS† PARAMETER MIN Output voltage Input voltage regulation Ripple rejection Output voltage regulation –24 VI = –27 V to –38 V VI = –28 V to –38 V VI = –28 V to –38 V, IO = 5 mA to 500 mA Temperature coefficient of output voltage IO = 5 mA to 350 mA IO = 5 mA, Output noise voltage f = 10 Hz to 100 kHz 12 12 IO = 300 mA, f = 120 Hz 58 75 50 TJ = 0°C to 125°C Dropout voltage Bias current Short-circuit output current TYP VI = –30 V Peak output current MAX UNIT V mV dB mV –1 mV/°C 600 µV 1.1 V 1.5 mA 140 mA A † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 2-µF capacitor across the input and a 1-µF capacitor across the output. 10 0.65 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. Customers are responsible for their applications using TI components. In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI’s publication of information regarding any third party’s products or services does not constitute TI’s approval, warranty or endorsement thereof. Copyright 2000, Texas Instruments Incorporated