1A1 THRU 1A9 MINIATURE GENERAL PURPOSE PLASTIC RECTIFIER Reverse Voltage - 50 to 1500 Volts Forward Current - 1.0 Ampere Features The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 Construction utilizes void-free molded plastic technique Low reverse leakage High reliability Low leakage Low forward voltage drop High current capability Mechanical Data DIM ENSIONS Case: Molded plastic black body, R-1 Lead: MIL-STD-202E method 208C guaranteed Mounting Position: Any Weight: 0.007 ounce, 0.20 gram DIM inches mm Min. Max. Min. Max. A 0.114 0.138 2.9 3.5 B 0.095 0.099 2.42 2.51 C 0.020 0.024 0.5 0.6 D 1.000 - 25.40 - Note Maximum Ratings and Electrical Characteristics Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbols 1A1 1A2 1A3 1A4 1A5 1A6 1A7 1A8 1A9 Units Volts Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 1250 1500 Maximum RMS voltage VRMS 35 70 140 280 420 560 700 875 1050 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 1250 1500 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length TA=25 I(AV) 1.0 Amp Peak forward surge current 8.3mS single half sine-wave superimposed on rated load (MIL-STD-750D 4066 method) TA=75 IFSM 30.0 Amps Maximum instantaneous forward voltage at 1.0A DC VF 1.1 Volts IR 5.0 100.0 CJ 25.0 F 60.0 /W Maximum DC reverse current at rated DC blocking voltage TA=25 TA=100 Typical junction capacitance (Note 1) Typical thermal resistance Operating and storage temperature range R JA TJ, TSTG -55 to +150 Note: (1) Measured at 1.0MHz and applied reverse voltage of 4.0 volts 1 A RATINGS AND CHARACTERISTIC CURVES 2