RGP10A thru RGP10M Glass Passivated Junction Fast Switching Rectifiers Reverse Voltage 50 to 1000 Volts Forward Current 1.0 Ampere Features Plastic package has Underwriters Laboratories Flammability Classification 94V-0 High temperature metallurgically bonded construction Cavity-free glass passivated junction Capable of meeting environmental standards of MIL-S-19500 For use in high frequency rectifier circuits Fast switching for high efficiency 1.0 Ampere operation at TA=55°C with no thermal runaway Typical IR less than 0.1µA High temperature soldering guaranteed: 350°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension Mechanical Data Case: JEDEC DO-204AL(DO-41)/A-405 molded plastic over galss body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: DO-41 - 0.012 ounce, 0.335 gram A-405 - 0.008 ounce, 0.235 gram Note: Lead diameter is 0.025(0.64)/0.021(0.53) for suffix "S" part numbers Maximum Ratings and Electrical Characteristics Ratings at 25oC ambient temperature unless otherwise specified. Symbol RGP 10A RGP 10B RGP 10D RGP 10G Maximum repetitive peak reverse voltage VRRM 50 100 200 Maximum RMS voltage VRMS 35 70 140 Maximum DC blocking voltage V DC 50 100 200 Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=55oC IF(AV) 1.0 Amp Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 30.0 Amps Maximum full load reverse current, full cycle average 0.375" (9.5mm) lead length at TA=55oC IR(AV) 100 uA Maximum instantaneous forward voltage at 1.0A VF 1.3 Volts IR 5.0 200 uA Parameter Maximum DC reverse current at rated DC blocking voltage @TA=25oC @TA=150oC RGP 10J RGP 10K RGP 10M Unit 400 600 800 1000 Volts 280 420 560 700 Volts 400 600 800 1000 Volts Maximum reverse recovery time at IF=0.5A, IR=1.0A, Irr=0.25A trr Typical junction capacitance at 4.0V, 1MHz CJ 15.0 RθJA 55.0 TJ, TSTG -55 to +150 Typical thermal resistance (Note 1) Operating junction and storage temperature range Notes: 150 1. Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C.B. mounted 81 250 500 nS pF o C/W o C RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) 82