SA5.0 thru SA180CA Transient Voltage Suppressors Peak Pulse Power 500W Stand Off Voltage 5.0 to 180V Features Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Glass passivated junction Excellent clamping capability Low incremental surge resistance Very fast response time 500W peak pulse power surge capability with a 10/100us waveform, repetition rate (duty cycle): 0.01% High temperature soldering guaranteed: 265oC/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3kg) tension Mechanical Data Case: JEDEC DO-204AC(DO-15) molded plastic body over passivated junction Terminals: Solder plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: For unidirectional types the color band denotes the cathode, which is positive with respect to the anode under normal TVS operation Mounting Position: Any Weight: 0.015oz., 0.4g Devices for Bidirectional Applications For bidirectional use C or CA suffix. (e.g. SA5.0C, SA170CA). Electrical characteristics apply in both directions. Maximum Ratings and Thermal Characteristics (Ratings at 25oC ambient temperature unless otherwise specified.) Symbol Value Unit Peak pulse power dissipation with a 10/1000us waveform (1) (Fig. 1) Parameter P PPM 500 (Min.) W Peak pulse current with a 10/1000us waveform (1) IPPM See Next Table A PM(AV) 3.0 W IFSM 70 A Volts Steady state power dissipation at TA=75oC lead lengths, 0.375" (9.5mm) (2) Peak forward surge current, 10ms single half sine-wave unidirectional only Maximum instantaneous forward voltage at 35A for unidirectional only VF 3.5 Operating junction and storage temperature range TJ, TSTG -55 to +175 Notes: o C 1. Non-repetitive current pulse, per Fig. 3 and derated above TA=25oC per Fig. 2. 2. Mounted on copper pad area of 1.6 x 1.6" (40 x 40mm) per Fig. 5. 3. 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. 576 Electrical Characteristics (TA=25oC unless otherwise noted) Breakdow n voltage V(BR) (Volts) (1) Stand-off voltage VWM (Volts) Maximum peak pulse surge current IPPM(2) (A) Maximum clamping voltage at IPPM VC (Volts) Maximum temperature coefficient of V(BR) (mV / oC) Device type Min. SA5.0 6.40 7.30 10 5.0 600 52.1 9.6 5.0 6.40 7.07 10 5.0 600 54.3 9.2 5.0 SA5.0A (4) Max. Test current at IT (mA) Maximum reverse leakage at VWM ID(3) (uA) SA6.0 6.67 8.15 10 6.0 600 43.9 11.4 5.0 SA6.0A 6.67 7.37 10 6.0 600 48.5 10.3 5.0 SA6.5 7.22 8.82 10 6.5 400 40.7 12.3 5.0 SA6.5A 7.22 7.98 10 6.5 400 44.7 11.2 5.0 SA7.0 7.78 9.51 10 7.0 150 37.6 13.3 6.0 SA7.0A 7.78 8.60 10 7.0 150 41.7 12.0 6.0 SA7.5 8.33 10.2 1.0 7.5 50 35.0 14.3 7.0 SA7.5A 8.33 9.21 1.0 7.5 50 38.8 12.9 7.0 SA8.0 8.89 10.9 1.0 8.0 25 33.3 15.0 7.0 SA8.0A 8.89 9.83 1.0 8.0 25 36.8 13.6 7.0 SA8.5 9.44 11.5 1.0 8.5 10 31.4 15.9 8.0 SA8.5A 9.44 10.4 1.0 8.5 10 34.7 14.4 8.0 SA9.0 10.0 12.2 1.0 9.0 5.0 29.6 16.9 9.0 SA9.0A 10.0 11.1 1.0 9.0 5.0 32.5 15.4 9.0 S A 10 11.1 13.6 1.0 10.0 1.0 26.6 18.8 10.0 S A 10A 11.1 12.3 1.0 10.0 1.0 29.4 17.0 10.0 SA11 12.2 14.9 1.0 11.0 1.0 24.9 20.1 11.0 SA11A 12.2 13.5 1.0 11.0 1.0 27.5 18.2 11.0 S A 12 13.3 16.3 1.0 12.0 1.0 22.7 22.0 12.0 S A 12A 13.3 14.7 1.0 12.0 1.0 25.1 19.9 12.0 S A 13 14.4 17.6 1.0 13.0 1.0 21.0 23.8 13.0 S A 13A 14.4 15.9 1.0 13.0 1.0 23.3 21.5 13.0 S A 14 15.6 19.1 1.0 14.0 1.0 19.4 25.8 14.0 S A 14A 15.6 17.2 1.0 14.0 1.0 21.6 23.2 14.0 S A 15 16.7 20.4 1.0 15.0 1.0 18.6 26.9 16.0 16.0 S A 15A 16.7 18.5 1.0 15.0 1.0 20.5 24.4 S A 16 17.8 21.8 1.0 16.0 1.0 17.4 28.8 19.0 S A 16A 17.8 19.7 1.0 16.0 1.0 19.2 26.0 17.0 S A 17 18.9 23.1 1.0 17.0 1.0 16.4 30.5 20.0 S A 17A 18.9 20.9 1.0 17.0 1.0 18.1 27.6 19.0 S A 18 20.0 24.4 1.0 18.0 1.0 15.5 32.2 21.0 S A 18A 20.0 22.1 1.0 18.0 1.0 17.1 29.2 20.0 S A 20 22.2 27.1 1.0 20.0 1.0 14.0 35.8 25.0 S A 20A 22.2 24.5 1.0 20.0 1.0 15.4 32.4 23.0 S A 22 24.4 29.8 1.0 22.0 1.0 13.1 39.4 28.0 S A 22A 24.4 26.9 1.0 22.0 1.0 14.1 35.5 25.0 S A 24 26.7 32.6 1.0 24.0 1.0 11.6 43.0 31.0 S A 24A 26.7 29.5 1.0 24.0 1.0 12.9 38.9 28.0 S A 26 28.9 35.3 1.0 26.0 1.0 10.7 46.6 31.0 S A 26A 28.9 31.9 1.0 26.0 1.0 11.9 42.1 30.0 S A 28 31.1 38.0 1.0 28.0 1.0 10.0 50.1 35.0 S A 28A 31.1 34.4 1.0 28.0 1.0 11.0 45.4 31.0 S A 30 33.3 40.7 1.0 30.0 1.0 9.3 53.5 39.0 S A 30A 33.3 36.8 1.0 30.0 1.0 10 48.4 36.0 577 Electrical Characteristics (TA=25oC unless otherwise noted) Breakdow n voltage V(BR) (Volts) (1) Stand-off voltage VWM (Volts) Maximum reverse leakage at VWM ID(3) (uA) Maximum peak pulse surge current IPPM(2) (A) Maximum clamping voltage at IPPM VC (Volts) Maximum temperature coefficient of V(BR) (mV / oC) 42.0 Device type Min. Max. Test current at IT (mA) S A 33 36.7 44.9 1.0 33.0 1.0 8.5 59.0 S A 33A 36.7 40.6 1.0 33.0 1.0 9.4 53.3 39.0 S A 36 40.0 48.9 1.0 36.0 1.0 7.8 64.3 46.0 41.0 S A 36A 40.0 44.2 1.0 36.0 1.0 8.6 58.1 S A 40 44.4 54.3 1.0 40.0 1.0 7.0 71.4 51.0 S A 40A 44.4 49.1 1.0 40.0 1.0 7.8 64.5 46.0 S A 43 47.8 58.4 1.0 43.0 1.0 6.5 76.7 55.0 S A 43A 47.8 52.8 1.0 43.0 1.0 7.2 69.4 50.0 S A 45 50.0 61.1 1.0 45.0 1.0 6.2 80.3 58.0 S A 45A 50.0 55.3 1.0 45.0 1.0 6.9 72.7 52.0 S A 48 53.3 65.2 1.0 48.0 1.0 5.8 85.5 63.0 S A 48A 53.3 58.9 1.0 48.0 1.0 6.5 77.4 56.0 S A 51 56.7 69.3 1.0 51.0 1.0 5.5 91.1 66.0 S A 51A 56.7 62.7 1.0 51.0 1.0 6.1 82.4 61.0 S A 54 60.0 73.3 1.0 54.0 1.0 5.2 96.3 71.0 S A 54A 60.0 66.3 1.0 54.0 1.0 5.7 87.1 65.0 S A 58 64.4 78.7 1.0 58.0 1.0 4.9 103 78.0 S A 58A 64.4 71.2 1.0 58.0 1.0 5.3 93.6 70.0 S A 60 66.7 81.5 1.0 60.0 1.0 4.7 107 80.0 S A 60A 66.7 73.7 1.0 60.0 1.0 5.2 96.8 71.0 S A 64 71.1 86.9 1.0 64.0 1.0 4.4 114 86.0 S A 64A 71.1 78.6 1.0 64.0 1.0 4.9 103 76.0 S A 70 77.8 95.1 1.0 70.0 1.0 4.0 125 94.0 S A 70A 77.8 86.0 1.0 70.0 1.0 4.4 113 85.0 S A 75 83.3 102 1.0 75.0 1.0 3.7 134 101 S A 75A 83.3 92.1 1.0 75.0 1.0 4.1 121 91.0 S A 78 86.7 106 1.0 78.0 1.0 3.6 139 105 S A 78A 86.7 95.8 1.0 78.0 1.0 4.0 126 95.0 S A 85 94.4 115 1.0 85.0 1.0 3.3 151 114 S A 85A 94.4 104 1.0 85.0 1.0 3.6 137 103 S A 90 100 122 1.0 90.0 1.0 3.1 160 121 S A 90A 100 111 1.0 90.0 1.0 3.4 146 110 S A 100 111 136 1.0 100.0 1.0 2.8 179 135 S A 100A 111 123 1.0 100.0 1.0 3.1 162 123 SA110 122 149 1.0 110.0 1.0 2.6 196 148 SA110A 122 135 1.0 110.0 1.0 2.8 177 133 S A 120 133 163 1.0 120.0 1.0 2.3 214 162 S A 120A 133 147 1.0 120.0 1.0 2.6 193 146 S A 130 144 176 1.0 130.0 1.0 2.2 230 175 S A 130A 144 159 1.0 130.0 1.0 2.4 209 158 S A 150 167 204 1.0 150.0 1.0 1.9 268 203 S A 150A 167 185 1.0 150.0 1.0 2.1 243 184 S A 160 178 218 1.0 160.0 1.0 1.7 257 217 S A 160A 178 197 1.0 160.0 1.0 1.9 259 196 S A 170 189 231 1.0 170.0 1.0 1.6 304 230 S A 170A 189 209 1.0 170.0 1.0 1.8 275 208 S A 180A 200 233 1.0 180.0 1.0 1.7 289 - Notes: 1. V(BR) measured after IT applied for 300us. IT=square wave pulse or equivalent 2. Surge current waveform per Fig. 3 and derate per Fig. 2 3. For bidirectional types with VWM of 10 Volts and less, the ID limit is doubled 4. For the bidirectional SA5.0CA, the maximum VBR is 7.25V 5. All terms and symbols are consistent with ANSI/IEEE C62.35 6. For parts without A, the VBR is +10% 578 RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) 579 RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) 580 RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) 581