1N5061 THRU 1N5062 SINTERED GLASS JUNCTION AVALANCHE RECTIFIER VOLTAGE： ：600V to 800V CURRENT: 2.0A FEATURE SOD-57 Glass passivated High maximum operating temperature Low leakage current Excellent stability Guaranteed avalanche energy absorption capability MECHANICAL DATA Case: SOD-57 sintered glass case Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Polarity: color band denotes cathode end Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8”lead length at Ttp =45°C Peak Forward Surge Current at t=10ms half sinewave Maximum Forward Voltage at rated Forward Current at 1.0A Maximum DC Reverse Current at rated DC blocking voltage Ta =25°C Ta =165°C Typical Reverse Recovery Time (Note 1) Diode capacitance at0V,1MHz Typical Thermal Resistance Storage and Operating Junction Temperature (Note 2) SYMBOL 1N5061 1N5062 units VRRM VRMS VDC 600 800 V 420 560 V 600 800 V IFAV 2.0 A IFSM 50 A VF 1.0 V IR 1.0 150.0 µA 3000 nS 50 pF 100 K/W -65 to +175 °C Trr Cd Rth(ja) Tstg, Tj Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Device mounted on epoxy-glass printed-circuit board, 1.5mm thick Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES 1N5061 THRU 1N5062 Rev.A1 www.gulfsemi.com