BYM26AGP THRU BYM26EGP SINTERED GLASS JUNCTION FAST SWITCHING PLASTIC RECTIFIER VOLTAGE： ：200V to 1000V CURRENT: 2.3A FEATURE DO-201AD High temperature metallurgically bonded construction Sintered glass cavity free junction Capability of meeting environmental standard of MIL-S-19500 High temperature soldering guaranteed 350°C /10sec/0.375”lead length at 5 lbs tension Low leakage current Typical Ir<0.1µA Excellent stability Guaranteed avalanche energy absorption capability MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) Vrrm Vrms Vdc BYM26 AGP 200 140 200 V(BR)R (min) 300 SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Reverse avalanche breakdown voltage at IR = 0.1 mA Maximum Average Forward Rectified Current 10mm lead length at Ta =55°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward Current and 25°C non-repetitive peak reverse avalanche energy (Note 1) Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =125°C Maximum Reverse Recovery Time (Note 2) Typical Junction Capacitance (Note 3) Typical Thermal Resistance (Note 4) Storage and Operating Junction Temperature BYM26 BGP 400 280 400 500 BYM26 CGP 600 420 600 BYM26 DGP 800 560 800 700 BYM26 EGP 1000 700 1000 units V V V 1100 900 V If(av) 2.3 A Ifsm 45 A Vf 2.65 V Ersm 10 mJ Ir 10.0 150.0 µA µA Trr Cj Rθja Tstg, Tj 30 75 75.0 20.0 -65 to +175 nS pF °C /W °C Note: 1. L = 120 mH; Tj = Tj max prior to surge; inductive load switched off 2.Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 3.Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 4.Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES BYM26AGP THRU BYM26EGP 1 Rev.A1 www.gulfsemi.com