GULFSEMI BYV95BGP

BYV95AGP THRU BYV95CGP
SINTERED GLASS JUNCTION
FAST SWITCHING PLASTIC RECTIFIER
VOLTAGE:200 TO 600V
CURRENT: 1.5A
FEATURE
DO-15\DO-204AC
High temperature metallurgically bonded construction
Sintered glass cavity free junction
Capability of meeting environmental standard of
MIL-S-19500
High temperature soldering guaranteed
350°C/10sec/0.375”lead length at 5 lbs tension
Operate at Ta =55°C with no thermal run away
Typical Ir<0.1µA
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity: color band denotes cathode
Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated)
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC blocking Voltage
reverse avalanche breakdown voltage
at IR = 0.1 mA
Maximum Average Forward Rectified
Current 3/8”lead length at Ta =65°C
Peak Forward Surge Current 8.3ms single
half sine-wave superimposed on rated load
Maximum Forward Voltage at rated Forward
Current and 25°C IF=3A
non-repetitive peak reverse avalanche energy
(Note 1)
Maximum DC Reverse Current
Ta =25°C
at rated DC blocking voltage
Ta =150°C
Maximum Reverse Recovery Time (Note 2)
Typical Junction Capacitance
(Note 3)
Typical Thermal Resistance
(Note 4)
Storage and Operating Junction Temperature
SYMBOL
BYV
95AGP
BYV
95BGP
BYV
95CGP
units
Vrrm
Vrms
Vdc
200
140
200
400
280
400
600
420
600
V
V
V
500
700
V
V(BR)R
(min)
300
If(av)
1.5
A
Ifsm
35.0
A
Vf
1.60
V
Ersm
10
mJ
Ir
5.0
150
µA
µA
Trr
Cj
250
45.0
nS
pF
R(ja)
46.0
Tstg, Tj
-65 to +175
°C /W
°C
Note: 1. L = 120 mH; Tj = Tj max prior to surge; inductive load switched off
2.Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
3.Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
4.Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted
Rev.A2
www.gulfsemi.com
RATINGS AND CHARACTERISTIC CURVES BYV95AGP THRU BYV95CGP
1
Rev.A2
www.gulfsemi.com