EU2JP FAST SWITCHING PLASTIC RECTIFIER VOLTAGE:600V CURRENT:1.0A FEATURE DO- 41\DO-204AL Molded case feature for auto insertion High current capability Low leakage current High surge capability High temperature soldering guaranteed 250°C10sec/0.375”lead length at 5 lbs tension Fast switching for high efficiency MECHANICAL DATA Terminal:Plated axial leads solderable per MIL-STD 202E, method 208C Case:Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity:color band denotes cathode Mounting position:any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL EU2JP units Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Vrrm Vrms Vdc 600 420 600 V V V Maximum Average Forward Rectified Current 3/8”lead length at Ta =75°C If(av) 1.0 A Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Ifsm 30.0 A Vf 1.1 5.0 100.0 150 15.0 50.0 -50 to +150 V Maximum Forward Voltage at rated Forward Current and 25°C Maximum DC Reverse Current at rated DC blocking voltage Ta =25°C Ta =100°C Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Storage and Operating Junction Temperature Ir Trr Cj R(ja) Tstg,Tj µA µA nS pF °C/W °C Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient at 0.375”lead length, P.C. Board Mounted Rev.A2, 4-Jan-06 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES EU2JP 1 1 Rev.A2 www.gulfsemi.com