GER20M SURFACE MOUNT AVALANCHE GLASS PASSIVATED RECTIFIER VOLTAGE： ：1000V CURRENT： ：2.0A SMA／ ／DO-214AC FEATURE Ideal for surface mount pick and place application Controlled avalanche characteristics Low profile package Built-in strain relief High surge capability High temperature soldering guaranteed 260℃/10sec/at terminals MECHANICAL DATA Terminal：Plated axial leads solderable per MIL-STD 202E, method 208C Case：Molded with UL-94 class V-0 recognized Flame Retardant Epoxy Polarity：color band denotes cathode Marking：ER2M Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated) SYMBOL GER20M units Maximum Recurrent Peak Reverse Voltage Vrrm 1000 V Maximum RMS Voltage Vrms 700 V Maximum DC blocking Voltage Vdc 1000 V Maximum Average Forward Rectified If(av) 2.0 A Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load Maximum Forward Voltage atrated Forward current Ifsm 50.0 A Vf V Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ Pulse energy in avalanche mode, non repetitive (inductive load switch off) at I(BR)R=1A Typical Junction Capacitance (Note 1) Ir 1.1 2.0 100.0 Typical Thermal Resistance (Note 2) Storage and Operating Temperature Range uA Er 20 mJ Cj 30.0 pF Rth(jl) 16.0 ℃/W Tj, Tstg -50 to +150 ℃ Note： 1. Measured at 1.0 MHZ and applied voltage of 4.0Vdc 2. Thermal Resistance from Junction to terminal mounted on 7×7mm copper pad area Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES GER20M Rev.A1 www.gulfsemi.com