GI1104 SINTERED GLASS JUNCTION FAST EFFICIENT RECTIFIER VOLTAGE： ：200V CURRENT: 2.0A FEATURE SOD-57 Glass passivated Superfast recovery time for high efficiency Low forward voltage, high current capability Low leakage High surge capability MECHANICAL DATA Case: SOD-57 sintered glass case Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Polarity: color band denotes cathode end Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL GI1104 units Maximum Recurrent Peak Reverse Voltage VRRM 200 V Maximum RMS Voltage VRMS 140 V Maximum DC blocking Voltage VDC 200 V IFAV 2.0 A IFSM 50 A VF 1.25 V IR 10.0 200 µA nS Maximum Average Forward Rectified Current 3/8”lead length at Ta=55℃ Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load Maximum Forward Voltage at Forward Current 1.0A and 25℃ Maximum DC Reverse Current at At rated DC Blocking Voltage Ta=25℃ Ta=100℃ Maximum Reverse Recovery Time (Note 1) Trr 50 Typical Junction Capacitance (Note 2) Cj 45.0 pF Typical Thermal Resistance (Note 3) Rth(ja) 65.0 ℃/W Tstg, Tj -65 to +150 ℃ Storage and Operating Junction Temperature Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient at 3/8” lead length and mounted on P.C. B. with 0.5×0.5” copper pads Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES GI1104 Rev.A1 www.gulfsemi.com