MURS180-A ULTRAFAST EFFICIENT GLASS PASSIVATED RECTIFIER VOLTAGE: 800V CURRENT: 1.0A FEATURE SMA/DO--214AC Ultrafast Nanosecond Recovery Times 150°C Operating Junction Temperature Low Forward Voltage Low Leakage Current High Temperature Glass Passivated Junction Mechanical Characteristics Case: JEDEC SMA/DO-214AC molded plastic body Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mark: M180 Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL MURS180-A units Maximum Recurrent Peak Reverse Voltage Vrrm 800 V Maximum RMS Voltage Vrms 640 V Vdc 800 V If(av) 1.0 A Ifsm 35 A Vf 1.75 V Ir 10 50 µA µA Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8”lead length at Ta =55°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward Current and 25°C Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =125°C Maximum Reverse Recovery Time (Note 1) Trr 75 nS Typical Junction Capacitance (Note 2) Cj 25 pF Typical Thermal Resistance (Note 3) Rth(ja) 50 ℃ /W Tstg, Tj -55 to +150 ℃ Storage and Operating Temperature Range Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC MURVES MURS180-A Rev.A1 www.gulfsemi.com