RU4TG GLASS PASSIVATED FAST RECOVERY RECTIFIER VOLTAGE: 1300V CURRENT: 3.0A FEATURE DO - 201AD Molded case feature for auto insertion High Switching Capability Low leakage current High surge capability High temperature soldering guaranteed 250°C /10sec/0.375" lead length at 5 lbs tension Glass Passivated chip MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8" lead length at Ta =55°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at rated forward current Maximum full load reverse current full cycle at TL =75°C Maximum DC Reverse Current at rated DC blocking voltage Typical Junction Capacitance Ta =25°C TL =55°C Vrrm units Vdc 1300 910 1300 V V V If(av) 3.0 A Ifsm 125 A Vf 1.8 V Ir(av) 30 µA 5.0 100.0 50.0 150 -55 to +150 µA µA Vrms Ir (Note 1) Cj Maximum Reverse Recovery Time (Note 2) Trr Storage and Operation Junction Temperature RU4TG Tstg, Tj pF nS °C Note: 1. Measured at 1.0 MHz and applied voltage of 4.0Vdc 2. Test Condition If =0.5A, Ir =1.0A, Irr =0.25A Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES RU4TG 1 Rev.A1 www.gulfsemi.com