SBYG10DG THRU SBYG10MG SURFACE MOUNT FAST SWITCHING RECTIFIER VOLTAGE： ：200V to 1000V CURRENT： ： 1.5A SMA／ ／DO-214AC FEATURE For surface mounted application High surge current capability Glass passivated chip High temperature soldering guaranteed 260℃/10sec/at terminals MECHANICAL DATA Terminal：Plated Terminal, solderable per MIL-STD 202E, method 208C Case：Molded with UL-94 class V-0 recognized Flame Retardant Epoxy Polarity：color band denotes cathode end Marking: G10D G10G G10J G10K G10M Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single—phase, half —wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated, for capacitive load, derate current by 20％) Symbol SBYG10 DG SBYG10 GG SBYG10 JG SBYG10 KG SBYG10 MG units Maximum Recurrent Peak Reverse Voltage Vrrm 200 400 600 800 1000 V Maximum RMS Voltage Vrms 140 280 420 560 700 V Maximum DC blocking Voltage Vdc 200 400 600 800 1000 V Maximum Average Forward Rectified Current If(av) 1.5 A Peak Forward Surge Current 10ms single half sinewave superimposed on rated load Maximum Forward Voltage at rated Forward current Ta =25℃ Pulse energy in avalanche mode, non repetitive (inductive load switch off) at I(BR)R=1A Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ Typical Thermal Resistance (Note 1) (Note 2) Ifsm 30 A Vf 1.15 V Er 20 mJ Rth(jl) Rth(ja) 1.0 40.0 25 150 Operating and Storage Temperature Range Tj, Tstg -50 to +150 Ir µA K/W ℃ Note： 1. TL=const 2. mounted on epoxy-glass hard tissue Rev.A2 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES SBYG10DG THRU SBYG10MG Rev.A2 www.gulfsemi.com