SBYV26A THRU SBYV26G SINTERED GLASS JUNCTION SURFACE MOUNTED RECTIFIER VOLTAGE： ： 200 to 1400V CURRENT: 1.0A FEATURE GF1/ DO-214BA Ideal for surface mount automotive applications High temperature metallurgically bonded construction Sintered glass cavity free junction Capability of meeting environmental standard of MIL-S-19500 High temperature soldering guaranteed 350°C /10sec/0.375”lead length at 5 lbs tension Operate at Ta =55°C with no thermal run away Typical Ir<0.1µA MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, Method 208C Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: color band denotes cathode Mounting position: any Marking: V26A V26B V26C V26D V26E V26F V26G Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL SBYV 26A SBYV 26B SBYV 26C SBYV 26D SBYV 26E SBYV 26F SBYV 26G units Maximum Recurrent Peak Reverse Voltage VRRM 200 400 600 800 1000 1200 1400 V Maximum RMS Voltage VRMS 140 280 420 560 700 840 980 V Maximum DC blocking Voltage VDC 200 400 600 800 1000 1200 1400 V V(BR)R 300 min 500 min 700 min 900 min 1100 min 1300 min 1500 min V Reverse avalanche breakdown voltage at IR = 0.1 mA Maximum Average Forward Rectified current TL =120℃ Non-repetitive Peak Forward Current at t=10ms half sine wave Maximum Forward Voltage at rated Forward Current Non-repetitive peak reverse avalanche energy (Note 1) Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =165°C IFAV 1.0 A IFSM 30 A VF 2.5 2.15 V ERSM 10 mJ IR 5.0 150.0 µA Maximum Reverse Recovery Time (Note 2) Trr 30 75 150 Diode Capacitance (Note 3) Cj 15.0 pF Typical Thermal Resistance (Note 4) Rth(ja) 100 °C /W Storage and Operating Junction Temperature Tstg, Tj -65 to +175 °C Note: 1. R=400mA; Tj=Tjmax prior to surge; inductive load switched off 2. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 3. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 4. Thermal Resistance from Junction to Ambient and from junction to lead, P.C.B. Mounted on 0.2×0.2″(5.0×5.0mm) copper pad areas Rev.A1 www.gulfsemi.com nS RATINGS AND CHARACTERISTIC CURVES SBYV26A THRU SBYV26G Rev.A1 www.gulfsemi.com