1T SS SS1 SINTERED GLASS JUNCTION SURFACE MOUNTED RECTIFIER 1300V VOLTAGE VOLTAGE：1300V A CURRENT CURRENT： 1.0 1.0A FEATURE GF1/ DO-214BA For surface mounted application High temperature metallurgic ally bonded Sintered glass junction Capability of meeting environmental standard of MIL-S-19500 High temperature soldering guaranteed 450℃/10sec/at terminal／complete device Submersible temperature of 265℃ for 10sec MECHANICAL DATA Terminal：Plated Terminal, solderable per MIL-STD 202, method 208C Case：Molded with UL-94 class V-0 recognized Flame Retardant Epoxy over Glass Polarity：color band denotes cathode end Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single—phase, half —wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated, for capacitive load, derate current by 20％) Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward current Maximum full load reverse current full cycle average at 75℃ ambient Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ SYMBOL SS1T units Vrrm Vrms Vdc If(av) 1300 910 1300 1.0 V V V A Ifsm 25.0 A Vf 1.3 V Ir(av) 30.0 μA Ir 5.0 50.0 μA Typical Junction Capacitance (Note 1) Cj 13.0 pF Typical Thermal Resistance (Note 2) Rth(ja) 80.0 ℃/W Tst, Tj -65 to +175 ℃ Operating and Storage Temperature Range Note： 1. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 2. Thermal Resistance from Junction to Ambient 6.0mm2 copper pad to each terminal Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES SS 1T SS1 Rev.A1 www.gulfsemi.com