UGRP20D Ultra fast Plastic Power Rectifiers VOLTAGE: 200V CURRENT:20.0A FEATURE ITO-220AB • Plastic package has Underwriters Laboratories Flammability Classification 94V-0 • Ideally suited for use in very high frequency switching power supplies, inverters and as free wheeling diodes • Ultra fast recovery time for high efficiency • Excellent high temperature switching • Glass passivated junction • High voltage and high reliability • High speed switching • Low forward voltage MECHANICAL DATA Case: JEDEC ITO-220AB molded plastic body over passivated chip Terminals: Plated Insert leads, solderable per MIL-STD-750, Method 2026 Mounting Position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL UGRP20D units Maximum Recurrent Peak Reverse Voltage Vrrm 200 V Maximum RMS Voltage Vrms 140 V Maximum DC blocking Voltage Vdc 200 V Maximum Average Forward Rectified with Heatsink Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at Forward Current at 10A per leg If(av) 20.0 A Ifsm 150 A Vf 0.98 V Trr 25 nS Rth(jc) 2.5 °C/W Ir 2.0 50 µA µA Tstg, Tj -55 to +150 °C Maximum Reverse Recovery Time (Note 1) Typical thermal resistance junction to case Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =125°C Storage and Operating Temperature Range Note: Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES UGRP20D Rev.A1 www.gulfsemi.com