UGSP03J Ultra fast Plastic Rectifiers VOLTAGE： ：600V CURRENT： ：3.0A FEATURE ITO-220AC • Plastic package has Underwriters Laboratories Flammability Classification 94V-0 • Ideally suited for use in very high frequency switching power supplies, inverters and as free wheeling diodes • Ultra fast recovery time for high efficiency • Excellent high temperature switching • Glass passivated junction • High voltage and high reliability • High speed switching • Low forward voltage MECHANICAL DATA Case: JEDEC ITO-220AC molded plastic body over passivated chip Terminals: Plated Insert leads, solderable per MIL-STD-750, Method 2026 Mounting Position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) Parameter SYMBOL UGSP03J units Maximum Recurrent Peak Reverse Voltage Vrrm 600 V Maximum RMS Voltage Vrms 420 V Maximum DC blocking Voltage Vdc 600 V Maximum Average Forward Rectified If(av) 3.0 A Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward Current Ifsm 65 A Vf 1.70 V Maximum Reverse Recovery Time Trr 25 nS Rth(jc) 5.0 Ir 10 800 µA Tstg, Tj -55 to +150 °C (Note 1) Typical thermal resistance junction to case Maximum DC Reverse Current at rated DC blocking voltage Ta =25°C Ta =100°C Storage and Operating Temperature Range °C/W Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES UGSP03J Rev.A1 www.gulfsemi.com