www.hamlin.com 55505 Flange Mount Hall Effect Geartooth Sensor Features Benefits Applications • Ferrous target sensing • Internal circuit protection • Protection against severe and automotive environments • Self adjusting magnetic range • Automotive grade circuit protection • High speed operation • Short circuit and reverse voltage protection • On board 10 bit A/D convertor • No chopper delay • Rotational alignment to target not critical • Immune to target run out • Wheel, transmission and camshaft speed sensing • Gear tooth sensor • Rotary encoders • Industrial • Commercial • Automotive DIMENSIONS (in) mm BLOCK DIAGRAM (1.630) 41,40 (1.250) 31,75 VDD Pin 3 (Red) (.236) 6,00 (.866) 22,00 (.197) 5,00 R1 Rpu Table 1 +/(.393) 10,00 (.250) 6,35 Nom Hall Plate Switch Comparator C1 (.703) ø17,86 (.260) ø6,60 (.937) ø23,80 Clock C2 OUT Pin 2 GND Pin 1 (Black) (.638) ø16,20 Output (W/B*) *White with Black Stripe SPECIFICATIONS SPECIFICATIONS Hall Type Digital Switch 3 Wire (Voltage Output) Supply Voltage Operate Vdc Supply Voltage Overvoltage Protection Vdc-max. 4.75 to 24 27 Supply Voltage Reverse Voltage Protection Vdc-max. -25 Output High Voltage Vdc Output Low Voltage Vdc-max. 0.6 @ 20mA Output Current (continuously on) mA-max. 20 Current Consumption mA-max. 1 Current Consumption mA-max. 10.5 Switching Speed VDD -2 (sinking output with internal pull-up) kHz-max. 15 Temperature Operating oC -40 to +125 Temperature Storage oC -65 to + 125 APPLICATION EXAMPLE - Geartooth Sensor CUSTOMER OPTIONS - Cable Length and Termination TABLE 2 Termination Options:- TABLE 1 Cable Length Options:(Cable Type 20 AWG Type TXL per SAE J-1128) .197 (5mm) Max. SELECT OPTION LENGTH 01 (3,94) 100 02 (11,81) 300 03 (19,69) 500 Typical Output SELECT OPTION DESCRIPTION A Tinned leads B Deutsch DTM04-3P C Molex MX 150 mm 04 (29,53) 750 05 (39,37) 1000 ORDERING INFORMATION 59036 55505 Series 55505 Cable Length Termination Hamlin USA Hamlin UK Hamlin Germany Hamectrol France Tel: Tel: Tel: Tel: XX X T Table 1 Table 2 +1 920 648 3000 • Fax: +1 920 648 3001 • Email: [email protected] +44 (0)1379 649700 • Fax: +44 (0)1379 649702 • Email: [email protected] +49 (0) 6142 923920 • Fax: +49 (0) 6142 923921 • Email: [email protected] +33(0) 1 6047 3000 • Fax: +33(0) 1 6015 9136 • Email: [email protected] Issue No: A C Date: 08.01.09 DCR B6063 00 INFORMATION PROVIDED ON THIS DATA SHEET IS PROVIDED FOR INFORMATION PURPOSES ONLY AND SHOULD NOT BE RELIED UPON AS BEING ACCURATE FOR ANY PARTICULAR PURPOSE. Product performance may be affected by the application to which the product is put. Upon request, HAMLIN will assist purchasers by providing information specific to any particular application. HAMLIN disclaims any and all liability whatsoever for any purchaser’s reliance upon the information contained on this data sheet without further consultation with authorised representatives of HAMLIN.