assuredcommunications ® RF-7800W-IU100 Network Interface Unit Power and network interface for the RF-7800W-OU440 Broadband Ethernet Radio The RF-7800W-IU100 provides the power requirements and meets the interface needs of one or two Broadband Ethernet Radio units. With wide range AC and DC voltage inputs, the RF-7800W-IU100 supports radio deployment to any location. To deploy critical high-capacity IP networks operational as quickly as possible, the RF-7800W-IU100 has integrated signal strength displays for two Broadband Ethernet Radios to aid antenna aiming. Front panel access for LAN connections, allows immediate interface to wired networks. The RF-7800W-IU100 supports point-to-point/point-tomultipoint radio configurations or retransmission configurations with simple toggle switch selection. The RF-7800W-IU100 is designed for both fixed and mobile environments and is available with rack, transit case, or shock mounts as needed. Specifications for the RF-7800W-IU100 Included Accessories General AC Power Cable, North American AC Input Range 85–265 VAC DC Input Range 10.5–34.5 VDC Ports High Power POE Radio (2), WAN (1), LAN (2) Signal Strength Indicators LED Bar Graph (2) Modes Router or Repeater–front panel switch selectable Radio Interface Ruggedized RJ-45 with power-over-Ethernet LAN/Wan Interface Ruggedized RJ-45 Routing Web-based configuration with SNMP/MIB-2 support Size 7.5 W x 10.0 D x 5.5 H in. (19.0 W x 25.5 D x 14.0 H cm) Weight 12.8 lbs (5.8 kg) Ethernet assuredcommunications® AC Power Cable, European DC Power Cable, Unterminated Optional Accessories RF-5071VSM-03 Vehicular Shock Mount RF-7800W-IU100 RF Communications | 1680 University Avenue | Rochester, NY USA 14610 www.harris.com 585-244-5830 Specifications subject to change without notice. Copyright © 2008 Harris Corporation 10/08 DS-387B